2018-02-08 18:48 GMT+01:00 Sean Paul <[email protected]>:
> This patch adds an override mode for kevin devices. The mode increases
> both back porches to allow a pixel clock of 26666kHz as opposed to the
> 'typical' value of 252750kHz. This is needed to avoid interference with
> the touch digitizer on these laptops.
>
> Changes in v2:
>  - Wrap the timing in display-timings node to match binding (Rob/Thierry)
> Changes in v3:
>  - Unwrap the timing from display-timings and rename panel-timing (Rob)
>
> Cc: Doug Anderson <[email protected]>
> Cc: Eric Anholt <[email protected]>
> Cc: Heiko Stuebner <[email protected]>
> Cc: Jeffy Chen <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Stéphane Marchesin <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Sean Paul <[email protected]>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts 
> b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
> index 191a6bcb1704..658411ce37ea 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
> @@ -98,6 +98,20 @@
>                 backlight = <&backlight>;
>                 power-supply = <&pp3300_disp>;
>
> +               panel-timing {
> +                       clock-frequency = <266604720>;
> +                       hactive = <2400>;
> +                       hfront-porch = <48>;
> +                       hback-porch = <84>;
> +                       hsync-len = <32>;
> +                       hsync-active = <0>;
> +                       vactive = <1600>;
> +                       vfront-porch = <3>;
> +                       vback-porch = <120>;
> +                       vsync-len = <10>;
> +                       vsync-active = <0>;
> +               };
> +
>                 ports {
>                         panel_in_edp: endpoint {
>                                 remote-endpoint = <&edp_out_panel>;
> --


Tested on top of linux-next on a Samsung Chromebook Plus.

Tested-by: Enric Balletbo i Serra <[email protected]>


> 2.16.0.rc1.238.g530d649a79-goog
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to