This patch adds an override mode for kevin devices. The mode increases both back porches to allow a pixel clock of 26666kHz as opposed to the 'typical' value of 252750kHz. This is needed to avoid interference with the touch digitizer on these laptops.
Changes in v2: - Wrap the timing in display-timings node to match binding (Rob/Thierry) Changes in v3: - Unwrap the timing from display-timings and rename panel-timing (Rob) Cc: Doug Anderson <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Heiko Stuebner <[email protected]> Cc: Jeffy Chen <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stéphane Marchesin <[email protected]> Cc: Thierry Reding <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sean Paul <[email protected]> --- arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 191a6bcb1704..658411ce37ea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -98,6 +98,20 @@ backlight = <&backlight>; power-supply = <&pp3300_disp>; + panel-timing { + clock-frequency = <266604720>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + ports { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; -- 2.16.0.rc1.238.g530d649a79-goog _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
