On Tue, 10 Sep 2019, Rich Shepard wrote: > I did find my note on now to restore from a backup (other than plain > copying) so I think I'll continue using dirvish with the new host. Just > need to re-learn how to set up banks and vaults.
Wes, et al.: I set up the bank and all the vaults for my desktop. However, when I try to initialize each dirvish tells me it cannot read the default.conf file. And, after a while the mounted drive is changed by the system from /dev/sdc1 to /dev/sdd1. The host has an AMD Ryzen7 2700 CPU and it is running a fully patched Slackware-14.2/x86_64. Currently, [root@salmo ~]# fdisk -l Disk /dev/sdd: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 41A307C8-6481-4D1D-AA8A-BF00D3DDF181 Device Start End Sectors Size Type /dev/sdd1 2048 3907029134 3907027087 1.8T Linux filesystem [root@salmo ~]# less /etc/fstab ... UUID=6e95864b-6291-4148-acd3-627542c8318f /mnt/backup ext4 defaults 1 2 The external hard drive is mounted on /mnt/backup. The vaults are (in alphabetical order) /salmo-data, /salmo-home, /salmo-opt, and /salmo-root. Each has a dirvish/ subdirectory which contains a vault-specific default.conf. default.conf is owned by root.root and has 644 perms. For example: # less /mnt/backup/salmo-dirvish/dirvish/default.conf client: [email protected] tree: /data xdev: 0 index: gzip [root@salmo ~]# dirvish --vault salmo.appl-ecosys.com --init cannot open config file: default.conf All ideas, suggestions, recommendations and advice are needed and welcome. Regards, Rich _______________________________________________ Dirvish mailing list [email protected] http://www.dirvish.org/mailman/listinfo/dirvish
