I can't check if the uboot is too old because board can't boot itself when i use flashboot image of Qt. So I can't update uboot from sd card too. It does nothing basically.
Also uboot is working at yocto images if it shows it is okay. ________________________________ Gönderen: Bahadır Can <bahadir....@outlook.com> Gönderildi: 20 Temmuz 2016 Çarşamba 16:41:49 Kime: development@qt-project.org Konu: Boot to Qt Device problem. Hello Qt Developers Team, I am currently working on a Sabre Automative Board with i.MX6Quad. I just started to use Qt Embedded . I am following this guide : http://doc.qt.io/QtForDeviceCreation/qtee-preparing-hardware-imx6sabresd.html I insterted a clean SD card to my device and run the flash boot to Qt Device. (with the option Sabre SD i.MX6Quad) After installation of image finished. I inserted SD card to Board and restarted the board but nothing happened. (Terminal and screen didn't work.) I also tried it with a beaglebone black but got nothing on it too. Am I missing any steps? Thanks from now. Bahadır Preparing SABRE SD i.MX6Quad | Qt 5.7 for Device Creation<http://doc.qt.io/QtForDeviceCreation/qtee-preparing-hardware-imx6sabresd.html> doc.qt.io Take the following steps to prepare Freescale SABRE SD i.MX6Quad for Boot to Qt: Note: It is important that you repeat the steps in this section after you update Qt ...
_______________________________________________ Development mailing list Development@qt-project.org http://lists.qt-project.org/mailman/listinfo/development
