Hi, Am 07/20/2016 um 03:41 PM schrieb Bahadır Can: > Hello Qt Developers Team, > > > I am currently working on a Sabre Automative Board with i.MX6Quad. I > just started to use Qt Embedded . > > > I am following this guide : > > > http://doc.qt.io/QtForDeviceCreation/qtee-preparing-hardware-imx6sabresd.html > > > I insterted a clean SD card to my device and run the flash boot to Qt > Device. (with the option Sabre SD i.MX6Quad) > > > After installation of image finished. I inserted SD card to Board and > restarted the board but nothing happened. (Terminal and screen didn't work.)
That could be related to an too old uboot version. It's probably a good idea to update the uboot on the board using the instructions here: http://doc.qt.io/QtForDeviceCreation/qtee-preparing-hardware-imx6.html Dominik > > > I also tried it with a beaglebone black but got nothing on it too. > > > Am I missing any steps? > > > Thanks from now. > > > Bahadır > > Preparing SABRE SD i.MX6Quad | Qt 5.7 for Device Creation > <http://doc.qt.io/QtForDeviceCreation/qtee-preparing-hardware-imx6sabresd.html> > doc.qt.io > Take the following steps to prepare Freescale SABRE SD i.MX6Quad for > Boot to Qt: Note: It is important that you repeat the steps in this > section after you update Qt ... > > > > > > _______________________________________________ > Development mailing list > Development@qt-project.org > http://lists.qt-project.org/mailman/listinfo/development > -- Dominik Holland SENIOR SOFTWARE ENGINEER Pelagicore AG Balanstr. 55, 81541 Munich, Germany +49 (0)171 760 25 96 dominik.holl...@pelagicore.com www.pelagicore.com _______________________________________________ Development mailing list Development@qt-project.org http://lists.qt-project.org/mailman/listinfo/development
