BUILD_TESTS and BUILD_PSXTESTS are two options that if either is True it should build psxclock02.
On Tue, Mar 30, 2021 at 9:20 AM zack_on_the_speed_chanel <zack_on_the_speed_cha...@protonmail.ch> wrote: > > I did build the leon3 bsp and I still don't see the psxtimer02 as an > executable. Is there a way build a test from source? I have the sources for > psxtest02. Also i'm thinking that it could be due to the fact that i don't > have posix tests enabled. Is there a way > that to enable posix? > > Thanks > Zack > > Sent with ProtonMail Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Monday, March 29, 2021 8:11 PM, zack_on_the_speed_chanel > <zack_on_the_speed_cha...@protonmail.ch> wrote: > > > Sorry that assumption was very native of me that i didn't have a working > > baseline. Joel said that the erc32 was similar to the leon bsp > > > > " > > The ERC32 what's the first space hardened sparc processor. The leon3 is a > > later processor in the same family. Both use the same build of GCC and are > > just different bsps. In fact both run on the same sis simulator. " > > I also though that the bsps were the same and I can work on the issue with > > only the erc32 BSP. I have one more question: when i run the hello world > > test. All the test files are within one specific directory and I don't see > > the executables for specific bsps that's why i thought all tests would be > > built (there would not be any specific considerations for bsps) . > > > > Sent with ProtonMail Secure Email. > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > On Monday, March 29, 2021 2:45 PM, Gedare Bloom ged...@rtems.org wrote: > > > > > On Sun, Mar 28, 2021 at 1:26 PM zack_on_the_speed_chanel > > > zack_on_the_speed_cha...@protonmail.ch wrote: > > > > > > > Hello all, > > > > I'm updating on what' i've found out with the issue (forgot to reply > > > > all) . Joel recommended me check the coverage for the leon BSP( to > > > > check if it's supported) and i found that the branch with > > > > CLOCK_MONOTONIC was not reached I think now that it's supported > > > > (because the annotated assembly is in the sparc instruction set). I > > > > also found out that the test would be similar to Psxclock02 and it runs > > > > the same tests on a different clock. Then I tried to build the > > > > psxclock02 test , change the create_clock to have the clock_monotonic > > > > argument and i didn't see the executable or any change in the ./waf > > > > build. Then I was suggested that you have to enable all tests some how? > > > > How do i enable all tests? > > > > > > Do you use something like: ./waf bsp_defaults ---rtems-bsp=leon3 > > > > config.ini > > > Then, take a look, BUILD_TESTS and BUILD_PSXTESTS are two options that > > > if either is True it should build psxclock02. > > > When you write code, you should first make sure you can build the code > > > as it exists if it is supposed to work, and run it to see that it > > > works. Then you should make changes from a working baseline. Otherwise > > > when you get a problem, how do you know if the problem is your > > > problem, or it already existed? > > > > > > > Thanks > > > > Zack > > > > devel mailing list > > > > devel@rtems.org > > > > http://lists.rtems.org/mailman/listinfo/devel > > _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
