On Fri, Feb 19, 2021 at 1:21 AM Jan Sommer <jan.som...@dlr.de> wrote: > > --- > user/bsps/arm/xilinx-zynq.rst | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/user/bsps/arm/xilinx-zynq.rst b/user/bsps/arm/xilinx-zynq.rst > index 365c336..dcc0649 100644 > --- a/user/bsps/arm/xilinx-zynq.rst > +++ b/user/bsps/arm/xilinx-zynq.rst > @@ -37,6 +37,20 @@ to return the peripheral clock. Normally this is half the > CPU > clock. This function is declared ``weak`` so you can override the > default behaviour by providing it in your application. > > +Console > +------- > + > +The console driver for the UARTs will always be set to a baud rate > +of 115200 with 8 bit characters, 1 stop bit and no parity bits > +during start up. > +Previous configurations programmed into the hardware by the Xilinx > +tools or a bootloader will be overwritten. > + > +The settings for parity and stop bits can be changes by the user > +application. The baud rate is hard coded to 115200 and can not be > +changed. > + > + Only 1 blank line here please. Chris to approve the content, I think he has the most to say on this topic :)
> Debugging with xilinx_zynq_a9_qemu > ---------------------------------- > > -- > 2.17.1 > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
