--- user/bsps/arm/xilinx-zynq.rst | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/user/bsps/arm/xilinx-zynq.rst b/user/bsps/arm/xilinx-zynq.rst index 365c336..dcc0649 100644 --- a/user/bsps/arm/xilinx-zynq.rst +++ b/user/bsps/arm/xilinx-zynq.rst @@ -37,6 +37,20 @@ to return the peripheral clock. Normally this is half the CPU clock. This function is declared ``weak`` so you can override the default behaviour by providing it in your application. +Console +------- + +The console driver for the UARTs will always be set to a baud rate +of 115200 with 8 bit characters, 1 stop bit and no parity bits +during start up. +Previous configurations programmed into the hardware by the Xilinx +tools or a bootloader will be overwritten. + +The settings for parity and stop bits can be changes by the user +application. The baud rate is hard coded to 115200 and can not be +changed. + + Debugging with xilinx_zynq_a9_qemu ---------------------------------- -- 2.17.1 _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
