On Thu, Feb 18, 2021 at 1:00 PM Gedare Bloom <ged...@rtems.org> wrote: > > On Wed, Jan 13, 2021 at 5:28 PM Robin Mueller <robin.muelle...@gmail.com> > wrote: > > > > --- > > > > Added doc for board variation, added some fixes > > from code review. (typo and line width formatting) > > > > user/bsps/arm/stm32h7.rst | 18 +++++++++++++++++- > > 1 file changed, 17 insertions(+), 1 deletion(-) > > > > diff --git a/user/bsps/arm/stm32h7.rst b/user/bsps/arm/stm32h7.rst > > index 3eee511..e1b9d8c 100644 > > --- a/user/bsps/arm/stm32h7.rst > > +++ b/user/bsps/arm/stm32h7.rst > > @@ -11,16 +11,32 @@ This BSP supports the > > The BSP is known to run on these boards: > > > > * `STM32H743I-EVAL 2 > > <https://www.st.com/en/evaluation-tools/stm32h743i-eval.html>`_ > > +* `STM32H743ZI-Nucleo > > <https://www.st.com/en/evaluation-tools/nucleo-h743zi.html>`_ > > > > Clock Driver > > ------------ > > > > -The clock driver uses the `ARMv7-M Systick` module. > > +The clock driver uses the `ARMv7-M Systick` module. The HSE (external > > +oscillator) value can also be different for different evaluation or custom > > +boards, so it is recommended to check the default values of the BSP. > > > > Console Driver > > -------------- > > > > The console driver supports the on-chip UART and USART modules. > > +Different board variations use different GPIO pins and blocks for the > > default > > +communication UART and it is recommended to check whether the default > > +configuration provided is valid in the BSP. > > + > > +To specify that the BSP should be built for the STM32H743ZI-Nucleo board, > > +users can supply ``STM32H743ZI_NUCLEO == True`` to ``config.ini`` when > Should this be one equal sign? >
I pushed with one equal sign. I also removed stray whitespaces at end of lines. > > +building the BSP. > > + > > +Alternatively, users can supply the configuration structs defined in > > ``hal.h`` > > +in the applicaton for other boards. For the console driver, the > > +``stm32h7_usartX_config`` structs are used to configure the GPIO pins and > > other > > +parameters. The default implementations can be found in > > +``bsps/arm/stm32ht/console`` in the RTEMS sources. > > > > Network Interface Driver > > ------------------------ > > -- > > 2.23.0.windows.1 > > > > _______________________________________________ > > devel mailing list > > devel@rtems.org > > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
