Hello Vijay,
for the whole patch set:
The order and groups are good now. I didn't find anything where I would
have big problems. All patches are compilable and libbsd still compiles
on a PowerPC target. The result is great (with some demo application I
get an image on the screen). So I'm OK with this version of the patch set.
I'm still not entirely happy with the pinmux because it re-initializes
some pins that are already initialized by the BSP. But if no one has a
better idea that can be done in a reasonable time I would accept it like
it is. I think I would prefer it without the hack that needs an extra
overlay. If the patch set is committed in this form, we will need a
ticket for that (wait with creating it till the commit) so that a future
project can work on that ticket.
Best regards
Christian
On 03/08/2019 22:19, Vijay Kumar Banerjee wrote:
> ---
> .../sys/arm/ti/am335x/am335x_scm_padconf.c | 305 ++++++++++++
> .../sys/arm/ti/am335x/am335x_scm_padconf.h | 47 ++
> freebsd/sys/arm/ti/omap4/omap4_scm_padconf.h | 83 ++++
> freebsd/sys/arm/ti/ti_pinmux.c | 463 ++++++++++++++++++
> freebsd/sys/arm/ti/ti_pinmux.h | 80 +++
> freebsd/sys/dev/fdt/fdt_pinctrl.c | 160 ++++++
> 6 files changed, 1138 insertions(+)
> create mode 100644 freebsd/sys/arm/ti/am335x/am335x_scm_padconf.c
> create mode 100644 freebsd/sys/arm/ti/am335x/am335x_scm_padconf.h
> create mode 100644 freebsd/sys/arm/ti/omap4/omap4_scm_padconf.h
> create mode 100644 freebsd/sys/arm/ti/ti_pinmux.c
> create mode 100644 freebsd/sys/arm/ti/ti_pinmux.h
> create mode 100644 freebsd/sys/dev/fdt/fdt_pinctrl.c
>
> diff --git a/freebsd/sys/arm/ti/am335x/am335x_scm_padconf.c
> b/freebsd/sys/arm/ti/am335x/am335x_scm_padconf.c
> new file mode 100644
> index 00000000..8823b6af
> --- /dev/null
> +++ b/freebsd/sys/arm/ti/am335x/am335x_scm_padconf.c
> @@ -0,0 +1,305 @@
> +#include <machine/rtems-bsd-kernel-space.h>
> +
> +/*-
> + * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
> + *
> + * Copyright (c) 2012 Damjan Marion <dmar...@freebsd.org>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + */
> +
> +#include <sys/cdefs.h>
> +__FBSDID("$FreeBSD$");
> +
> +#include <sys/param.h>
> +#include <sys/systm.h>
> +#include <sys/kernel.h>
> +#include <sys/module.h>
> +#include <sys/bus.h>
> +#include <rtems/bsd/sys/resource.h>
> +#include <sys/rman.h>
> +#include <sys/lock.h>
> +#include <sys/malloc.h>
> +
> +#include <machine/bus.h>
> +#include <machine/resource.h>
> +#include <machine/intr.h>
> +#include <sys/gpio.h>
> +
> +#include <arm/ti/tivar.h>
> +#include <arm/ti/ti_pinmux.h>
> +
> +#include <arm/ti/am335x/am335x_scm_padconf.h>
> +
> +#define _PIN(r, b, gp, gm, m0, m1, m2, m3, m4, m5, m6, m7) \
> + { .reg_off = r, \
> + .gpio_pin = gp, \
> + .gpio_mode = gm, \
> + .ballname = b, \
> + .muxmodes[0] = m0, \
> + .muxmodes[1] = m1, \
> + .muxmodes[2] = m2, \
> + .muxmodes[3] = m3, \
> + .muxmodes[4] = m4, \
> + .muxmodes[5] = m5, \
> + .muxmodes[6] = m6, \
> + .muxmodes[7] = m7, \
> + }
> +
> +const static struct ti_pinmux_padstate ti_padstate_devmap[] = {
> + {"output", PADCONF_OUTPUT },
> + {"output_pullup", PADCONF_OUTPUT_PULLUP },
> + {"input", PADCONF_INPUT },
> + {"input_pulldown", PADCONF_INPUT_PULLDOWN },
> + {"input_pullup", PADCONF_INPUT_PULLUP },
> + {"i2c", PADCONF_INPUT_PULLUP_SLOW },
> + { .state = NULL }
> +};
> +
> +const static struct ti_pinmux_padconf ti_padconf_devmap[] = {
> + _PIN(0x000, "GPMC_AD0", 32, 7,"gpmc_ad0", "mmc1_dat0", NULL,
> NULL, NULL, NULL, NULL, "gpio1_0"),
> + _PIN(0x004, "GPMC_AD1", 33, 7,"gpmc_ad1", "mmc1_dat1", NULL,
> NULL, NULL, NULL, NULL, "gpio1_1"),
> + _PIN(0x008, "GPMC_AD2", 34, 7,"gpmc_ad2", "mmc1_dat2", NULL,
> NULL, NULL, NULL, NULL, "gpio1_2"),
> + _PIN(0x00C, "GPMC_AD3", 35, 7,"gpmc_ad3", "mmc1_dat3", NULL,
> NULL, NULL, NULL, NULL, "gpio1_3"),
> + _PIN(0x010, "GPMC_AD4", 36, 7,"gpmc_ad4", "mmc1_dat4", NULL,
> NULL, NULL, NULL, NULL, "gpio1_4"),
> + _PIN(0x014, "GPMC_AD5", 37, 7,"gpmc_ad5", "mmc1_dat5", NULL,
> NULL, NULL, NULL, NULL, "gpio1_5"),
> + _PIN(0x018, "GPMC_AD6", 38, 7,"gpmc_ad6", "mmc1_dat6", NULL,
> NULL, NULL, NULL, NULL, "gpio1_6"),
> + _PIN(0x01C, "GPMC_AD7", 39, 7,"gpmc_ad7", "mmc1_dat7", NULL,
> NULL, NULL, NULL, NULL, "gpio1_7"),
> + _PIN(0x020, "GPMC_AD8", 22, 7, "gpmc_ad8", "lcd_data23",
> "mmc1_dat0", "mmc2_dat4", "ehrpwm2A", NULL, NULL, "gpio0_22"),
> + _PIN(0x024, "GPMC_AD9", 23, 7, "gpmc_ad9", "lcd_data22",
> "mmc1_dat1", "mmc2_dat5", "ehrpwm2B", NULL, NULL, "gpio0_23"),
> + _PIN(0x028, "GPMC_AD10", 26, 7, "gpmc_ad10", "lcd_data21",
> "mmc1_dat2", "mmc2_dat6", "ehrpwm2_tripzone_in", NULL, NULL, "gpio0_26"),
> + _PIN(0x02C, "GPMC_AD11", 27, 7, "gpmc_ad11", "lcd_data20",
> "mmc1_dat3", "mmc2_dat7", "ehrpwm0_synco", NULL, NULL, "gpio0_27"),
> + _PIN(0x030, "GPMC_AD12", 44, 7, "gpmc_ad12", "lcd_data19",
> "mmc1_dat4", "mmc2_dat0", "eQEP2A_in", "pr1_mii0_txd2",
> "pr1_pru0_pru_r30_14", "gpio1_12"),
> + _PIN(0x034, "GPMC_AD13", 45, 7, "gpmc_ad13", "lcd_data18",
> "mmc1_dat5", "mmc2_dat1", "eQEP2B_in", "pr1_mii0_txd1",
> "pr1_pru0_pru_r30_15", "gpio1_13"),
> + _PIN(0x038, "GPMC_AD14", 46, 7, "gpmc_ad14", "lcd_data17",
> "mmc1_dat6", "mmc2_dat2", "eQEP2_index", "pr1_mii0_txd0",
> "pr1_pru0_pru_r31_14", "gpio1_14"),
> + _PIN(0x03C, "GPMC_AD15", 47, 7, "gpmc_ad15", "lcd_data16",
> "mmc1_dat7", "mmc2_dat3", "eQEP2_strobe", "pr1_ecap0_ecap_capin_apwm_o",
> "pr1_pru0_pru_r31_15", "gpio1_15"),
> + _PIN(0x040, "GPMC_A0", 48, 7, "gpmc_a0", "gmii2_txen",
> "rgmii2_tctl", "rmii2_txen", "gpmc_a16", "pr1_mii_mt1_clk",
> "ehrpwm1_tripzone_input", "gpio1_16"),
> + _PIN(0x044, "GPMC_A1", 49, 7, "gpmc_a1", "gmii2_rxdv",
> "rgmii2_rctl", "mmc2_dat0", "gpmc_a17", "pr1_mii1_txd3", "ehrpwm0_synco",
> "gpio1_17"),
> + _PIN(0x048, "GPMC_A2", 50, 7, "gpmc_a2", "gmii2_txd3",
> "rgmii2_td3", "mmc2_dat1", "gpmc_a18", "pr1_mii1_txd2", "ehrpwm1A",
> "gpio1_18"),
> + _PIN(0x04C, "GPMC_A3", 51, 7, "gpmc_a3", "gmii2_txd2",
> "rgmii2_td2", "mmc2_dat2", "gpmc_a19", "pr1_mii1_txd1", "ehrpwm1B",
> "gpio1_19"),
> + _PIN(0x050, "GPMC_A4", 52, 7, "gpmc_a4", "gmii2_txd1",
> "rgmii2_td1", "rmii2_tdx1", "gpmc_a20", "pr1_mii1_txd0", "eQEP1A_in",
> "gpio1_20"),
> + _PIN(0x054, "GPMC_A5", 53, 7, "gpmc_a5", "gmii2_txd0",
> "rgmii2_td0", "rmii2_txd0", "gpmc_a21", "pr1_mii1_rxd3", "eQEP1B_in",
> "gpio1_21"),
> + _PIN(0x058, "GPMC_A6", 54, 7, "gpmc_a6", "gmii2_txclk",
> "rgmii2_tclk", "mmc2_dat4", "gpmc_a22", "pr1_mii1_rxd2", "eQEP1_index",
> "gpio1_22"),
> + _PIN(0x05C, "GPMC_A7", 55, 7, "gpmc_a7", "gmii2_rxclk",
> "rgmii2_rclk", "mmc2_dat5", "gpmc_a23", "pr1_mii1_rxd1", "eQEP1_strobe",
> "gpio1_23"),
> + _PIN(0x060, "GPMC_A8", 56, 7, "gpmc_a8", "gmii2_rxd3",
> "rgmii2_rd3", "mmc2_dat6", "gpmc_a24", "pr1_mii1_rxd0", "mcasp0_aclkx",
> "gpio1_24"),
> + _PIN(0x064, "GPMC_A9", 57, 7, "gmpc_a9", "gmii2_rxd2",
> "rgmii2_rd2", "mmc2_dat7 / rmii2_crs_dv", "gpmc_a25", "pr1_mii_mr1_clk",
> "mcasp0_fsx", "gpio1_25"),
> + _PIN(0x068, "GPMC_A10", 58, 7, "gmpc_a10", "gmii2_rxd1",
> "rgmii2_rd1", "rmii2_rxd1", "gpmc_a26", "pr1_mii1_rxdv", "mcasp0_arx0",
> "gpio1_26"),
> + _PIN(0x06C, "GPMC_A11", 59, 7, "gmpc_a11", "gmii2_rxd0",
> "rgmii2_rd0", "rmii2_rxd0", "gpmc_a27", "pr1_mii1_rxer", "mcasp0_axr1",
> "gpio1_27"),
> + _PIN(0x070, "GPMC_WAIT0", 30, 7, "gpmc_wait0", "gmii2_crs",
> "gpmc_csn4", "rmii2_crs_dv", "mmc1_sdcd", "pr1_mii1_col", "uart4_rxd",
> "gpio0_30"),
> + _PIN(0x074, "GPMC_WPn", 31, 7, "gpmc_wpn", "gmii2_rxerr",
> "gpmc_csn5", "rmii2_rxerr", "mmc2_sdcd", "pr1_mii1_txen", "uart4_txd",
> "gpio0_31"),
> + _PIN(0x078, "GPMC_BEn1", 60, 7, "gpmc_be1n", "gmii2_col",
> "gmpc_csn6","mmc2_dat3", "gpmc_dir", "pr1_mii1_rxlink", "mcasp0_aclkr",
> "gpio1_28"),
> + _PIN(0x07c, "GPMC_CSn0", 61, 7, "gpmc_csn0", NULL, NULL, NULL,
> NULL, NULL, NULL, "gpio1_29"),
> + _PIN(0x080, "GPMC_CSn1", 62, 7, "gpmc_csn1", "gpmc_clk",
> "mmc1_clk", "pr1_edio_data_in6", "pr1_edio_data_out6", "pr1_pru1_pru_r30_12",
> "pr1_pru1_pru_r31_12", "gpio1_30"),
> + _PIN(0x084, "GPMC_CSn2", 63, 7, "gpmc_csn2", "gpmc_be1n",
> "mmc1_cmd", "pr1_edio_data_in7", "pr1_edio_data_out7", "pr1_pru1_pru_r30_13",
> "pr1_pru1_pru_r31_13", "gpio1_31"),
> + _PIN(0x088, "GPMC_CSn3", 64, 7, "gpmc_csn3", "gpmc_a3",
> "rmii2_crs_dv", "mmc2_cmd", "pr1_mii0_crs", "pr1_mdio_data", "EMU4",
> "gpio2_0"),
> + _PIN(0x08c, "GPMC_CLK", 65, 7, "gpmc_clk", "lcd_memory_clk",
> "gpmc_wait1", "mmc2_clk", "pr1_mii1_crs", "pr1_mdio_mdclk", "mcasp0_fsr",
> "gpio2_1"),
> + _PIN(0x090, "GPMC_ADVn_ALE", 66, 7, "gpmc_advn_ale", NULL, "timer4",
> NULL, NULL, NULL, NULL, "gpio2_2"),
> + _PIN(0x094, "GPMC_OEn_REn", 67, 7, "gpmc_oen_ren", NULL, "timer7",
> NULL, NULL, NULL, NULL, "gpio2_3"),
> + _PIN(0x098, "GPMC_WEn", 68, 7, "gpmc_wen", NULL, "timer6",
> NULL, NULL, NULL, NULL, "gpio2_4"),
> + _PIN(0x09c, "GPMC_BEn0_CLE", 67, 7, "gpmc_ben0_cle", NULL, "timer5",
> NULL, NULL, NULL, NULL, "gpio2_5"),
> + _PIN(0x0a0, "LCD_DATA0", 68, 7, "lcd_data0", "gpmc_a0",
> "pr1_mii_mt0_clk", "ehrpwm2A", NULL, "pr1_pru1_pru_r30_0",
> "pr1_pru1_pru_r31_0", "gpio2_6"),
> + _PIN(0x0a4, "LCD_DATA1", 69, 7, "lcd_data1", "gpmc_a1",
> "pr1_mii0_txen", "ehrpwm2B", NULL, "pr1_pru1_pru_r30_1",
> "pr1_pru1_pru_r31_1", "gpio2_7"),
> + _PIN(0x0a8, "LCD_DATA2", 70, 7, "lcd_data2", "gpmc_a2",
> "pr1_mii0_txd3", "ehrpwm2_tripzone_input", NULL, "pr1_pru1_pru_r30_2",
> "pr1_pru1_pru_r31_2", "gpio2_8"),
> + _PIN(0x0ac, "LCD_DATA3", 71, 7, "lcd_data3", "gpmc_a3",
> "pr1_mii0_txd2", "ehrpwm0_synco", NULL, "pr1_pru1_pru_r30_3",
> "pr1_pru1_pru_r31_3", "gpio2_9"),
> + _PIN(0x0b0, "LCD_DATA4", 72, 7, "lcd_data4", "gpmc_a4",
> "pr1_mii0_txd1", "eQEP2A_in", NULL, "pr1_pru1_pru_r30_4",
> "pr1_pru1_pru_r31_4", "gpio2_10"),
> + _PIN(0x0b4, "LCD_DATA5", 73, 7, "lcd_data5", "gpmc_a5",
> "pr1_mii0_txd0", "eQEP2B_in", NULL, "pr1_pru1_pru_r30_5",
> "pr1_pru1_pru_r31_5", "gpio2_11"),
> + _PIN(0x0b8, "LCD_DATA6", 74, 7, "lcd_data6", "gpmc_a6",
> "pr1_edio_data_in6", "eQEP2_index", "pr1_edio_data_out6",
> "pr1_pru1_pru_r30_6", "pr1_pru1_pru_r31_6", "gpio2_12"),
> + _PIN(0x0bc, "LCD_DATA7", 75, 7, "lcd_data7", "gpmc_a7",
> "pr1_edio_data_in7", "eQEP2_strobe", "pr1_edio_data_out7",
> "pr1_pru1_pru_r30_7", "pr1_pru1_pru_r31_7", "gpio2_13"),
> + _PIN(0x0c0, "LCD_DATA8", 76, 7, "lcd_data8", "gpmc_a12",
> "ehrpwm1_tripzone_input", "mcasp0_aclkx", "uart5_txd", "pr1_mii0_rxd3",
> "uart2_ctsn", "gpio2_14"),
> + _PIN(0x0c4, "LCD_DATA9", 76, 7, "lcd_data9", "gpmc_a13",
> "ehrpwm0_synco", "mcasp0_fsx", "uart5_rxd", "pr1_mii0_rxd2", "uart2_rtsn",
> "gpio2_15"),
> + _PIN(0x0c8, "LCD_DATA10", 77, 7, "lcd_data10", "gpmc_a14",
> "ehrpwm1A", "mcasp0_axr0", NULL, "pr1_mii0_rxd1", "uart3_ctsn", "gpio2_16"),
> + _PIN(0x0cc, "LCD_DATA11", 78, 7, "lcd_data11", "gpmc_a15",
> "ehrpwm1B", "mcasp0_ahclkr", "mcasp0_axr2", "pr1_mii0_rxd0", "uart3_rtsn",
> "gpio2_17"),
> + _PIN(0x0d0, "LCD_DATA12", 8, 7, "lcd_data12", "gpmc_a16",
> "eQEP1A_in", "mcasp0_aclkr", "mcasp0_axr2", "pr1_mii0_rxlink", "uart4_ctsn",
> "gpio0_8"),
> + _PIN(0x0d4, "LCD_DATA13", 9, 7, "lcd_data13", "gpmc_a17",
> "eQEP1B_in", "mcasp0_fsr", "mcasp0_axr3", "pr1_mii0_rxer", "uart4_rtsn",
> "gpio0_9"),
> + _PIN(0x0d8, "LCD_DATA14", 10, 7, "lcd_data14", "gpmc_a18",
> "eQEP1_index", "mcasp0_axr1", "uart5_rxd", "pr1_mii_mr0_clk", "uart5_ctsn",
> "gpio0_10"),
> + _PIN(0x0dc, "LCD_DATA15", 11, 7, "lcd_data15", "gpmc_a19",
> "eQEP1_strobe", "mcasp0_ahclkx", "mcasp0_axr3", "pr1_mii0_rxdv",
> "uart5_rtsn", "gpio0_11"),
> + _PIN(0x0e0, "LCD_VSYNC", 86, 7, "lcd_vsync", "gpmc_a8",
> "gpmc_a1", "pr1_edio_data_in2", "pr1_edio_data_out2", "pr1_pru1_pru_r30_8",
> "pr1_pru1_pru_r31_8", "gpio2_22"),
> + _PIN(0x0e4, "LCD_HSYNC", 87, 7, "lcd_hsync", "gmpc_a9",
> "gpmc_a2", "pr1_edio_data_in3", "pr1_edio_data_out3", "pr1_pru1_pru_r30_9",
> "pr1_pru1_pru_r31_9", "gpio2_23"),
> + _PIN(0x0e8, "LCD_PCLK", 88, 7, "lcd_pclk", "gpmc_a10",
> "pr1_mii0_crs", "pr1_edio_data_in4", "pr1_edio_data_out4",
> "pr1_pru1_pru_r30_10", "pr1_pru1_pru_r31_10", "gpio2_24"),
> + _PIN(0x0ec, "LCD_AC_BIAS_EN", 89, 7, "lcd_ac_bias_en", "gpmc_a11",
> "pr1_mii1_crs", "pr1_edio_data_in5", "pr1_edio_data_out5",
> "pr1_pru1_pru_r30_11", "pr1_pru1_pru_r31_11", "gpio2_25"),
> + _PIN(0x0f0, "MMC0_DAT3", 90, 7, "mmc0_dat3", "gpmc_a20",
> "uart4_ctsn", "timer5", "uart1_dcdn", "pr1_pru0_pru_r30_8",
> "pr1_pru0_pru_r31_8", "gpio2_26"),
> + _PIN(0x0f4, "MMC0_DAT2", 91, 7, "mmc0_dat2", "gpmc_a21",
> "uart4_rtsn", "timer6", "uart1_dsrn", "pr1_pru0_pru_r30_9",
> "pr1_pru0_pru_r31_9", "gpio2_27"),
> + _PIN(0x0f8, "MMC0_DAT1", 92, 7, "mmc0_dat1", "gpmc_a22",
> "uart5_ctsn", "uart3_rxd", "uart1_dtrn", "pr1_pru0_pru_r30_10",
> "pr1_pru0_pru_r31_10", "gpio2_28"),
> + _PIN(0x0fc, "MMC0_DAT0", 93, 7, "mmc0_dat0", "gpmc_a23",
> "uart5_rtsn", "uart3_txd", "uart1_rin", "pr1_pru0_pru_r30_11",
> "pr1_pru0_pru_r31_11", "gpio2_29"),
> + _PIN(0x100, "MMC0_CLK", 94, 7, "mmc0_clk", "gpmc_a24",
> "uart3_ctsn", "uart2_rxd", "dcan1_tx", "pr1_pru0_pru_r30_12",
> "pr1_pru0_pru_r31_12", "gpio2_30"),
> + _PIN(0x104, "MMC0_CMD", 95, 7, "mmc0_cmd", "gpmc_a25",
> "uart3_rtsn", "uart2_txd", "dcan1_rx", "pr1_pru0_pru_r30_13",
> "pr1_pru0_pru_r31_13", "gpio2_31"),
> + _PIN(0x108, "MII1_COL", 96, 7, "gmii1_col", "rmii2_refclk",
> "spi1_sclk", "uart5_rxd", "mcasp1_axr2", "mmc2_dat3", "mcasp0_axr2",
> "gpio3_0"),
> + _PIN(0x10c, "MII1_CRS", 97, 7, "gmii1_crs", "rmii1_crs_dv",
> "spi1_d0", "I2C1_SDA", "mcasp1_aclkx", "uart5_ctsn", "uart2_rxd", "gpio3_1"),
> + _PIN(0x110, "MII1_RX_ER", 98, 7, "gmii1_rxerr", "rmii1_rxerr",
> "spi1_d1", "I2C1_SCL", "mcasp1_fsx", "uart5_rtsn", "uart2_txd", "gpio3_2"),
> + _PIN(0x114, "MII1_TX_EN", 99, 7, "gmii1_txen", "rmii1_txen",
> "rgmii1_tctl", "timer4", "mcasp1_axr0", "eQEP0_index", "mmc2_cmd", "gpio3_3"),
> + _PIN(0x118, "MII1_RX_DV", 100, 7, "gmii1_rxdv", "cd_memory_clk",
> "rgmii1_rctl", "uart5_txd", "mcasp1_aclkx", "mmc2_dat0", "mcasp0_aclkr",
> "gpio3_4"),
> + _PIN(0x11c, "MII1_TXD3", 16, 7, "gmii1_txd3", "dcan0_tx",
> "rgmii1_td3", "uart4_rxd", "mcasp1_fsx", "mmc2_dat1", "mcasp0_fsr",
> "gpio0_16"),
> + _PIN(0x120, "MII1_TXD2", 17, 7, "gmii1_txd2", "dcan0_rx",
> "rgmii1_td2", "uart4_txd", "mcasp1_axr0", "mmc2_dat2", "mcasp0_ahclkx",
> "gpio0_17"),
> + _PIN(0x124, "MII1_TXD1", 21, 7, "gmii1_txd1", "rmii1_txd1",
> "rgmii1_td1", "mcasp1_fsr", "mcasp1_axr1", "eQEP0A_in", "mmc1_cmd",
> "gpio0_21"),
> + _PIN(0x128, "MII1_TXD0", 28, 7, "gmii1_txd0", "rmii1_txd0",
> "rgmii1_td0", "mcasp1_axr2", "mcasp1_aclkr", "eQEP0B_in", "mmc1_clk",
> "gpio0_28"),
> + _PIN(0x12c, "MII1_TX_CLK", 105, 7, "gmii1_txclk", "uart2_rxd",
> "rgmii1_tclk", "mmc0_dat7", "mmc1_dat0", "uart1_dcdn", "mcasp0_aclkx",
> "gpio3_9"),
> + _PIN(0x130, "MII1_RX_CLK", 106, 7, "gmii1_rxclk", "uart2_txd",
> "rgmii1_rclk", "mmc0_dat6", "mmc1_dat1", "uart1_dsrn", "mcasp0_fsx",
> "gpio3_10"),
> + _PIN(0x134, "MII1_RXD3", 82, 7, "gmii1_rxd3", "uart3_rxd",
> "rgmii1_rd3", "mmc0_dat5", "mmc1_dat2", "uart1_dtrn", "mcasp0_axr0",
> "gpio2_18"),
> + _PIN(0x138, "MII1_RXD2", 83, 7, "gmii1_rxd2", "uart3_txd",
> "rgmii1_rd2", "mmc0_dat4", "mmc1_dat3", "uart1_rin", "mcasp0_axr1",
> "gpio2_19"),
> + _PIN(0x13c, "MII1_RXD1", 84, 7, "gmii1_rxd1", "rmii1_rxd1",
> "rgmii1_rd1", "mcasp1_axr3", "mcasp1_fsr", "eQEP0_strobe", "mmc2_clk",
> "gpio2_20"),
> + _PIN(0x140, "MII1_RXD0", 85, 7, "gmii1_rxd0", "rmii1_rxd0",
> "rgmii1_rd0", "mcasp1_ahclkx", "mcasp1_ahclkr", "mcasp1_aclkr",
> "mcasp0_axr3", "gpio2_21"),
> + _PIN(0x144, "RMII1_REF_CLK", 29, 7, "rmii1_refclk",
> "xdma_event_intr2", "spi1_cs0", "uart5_txd", "mcasp1_axr3", "mmc0_pow",
> "mcasp1_ahclkx", "gpio0_29"),
> + _PIN(0x148, "MDIO", 0, 7, "mdio_data", "timer6",
> "uart5_rxd", "uart3_ctsn", "mmc0_sdcd","mmc1_cmd", "mmc2_cmd","gpio0_0"),
> + _PIN(0x14c, "MDC", 1, 7, "mdio_clk", "timer5",
> "uart5_txd", "uart3_rtsn", "mmc0_sdwp", "mmc1_clk", "mmc2_clk", "gpio0_1"),
> + _PIN(0x150, "SPI0_SCLK", 2, 7, "spi0_sclk", "uart2_rxd",
> "I2C2_SDA", "ehrpwm0A", "pr1_uart0_cts_n", "pr1_edio_sof", "EMU2", "gpio0_2"),
> + _PIN(0x154, "SPI0_D0", 3, 7, "spi0_d0", "uart2_txd",
> "I2C2_SCL", "ehrpwm0B", "pr1_uart0_rts_n", "pr1_edio_latch_in", "EMU3",
> "gpio0_3"),
> + _PIN(0x158, "SPI0_D1", 4, 7, "spi0_d1", "mmc1_sdwp",
> "I2C1_SDA", "ehrpwm0_tripzone_input", "pr1_uart0_rxd", "pr1_edio_data_in0",
> "pr1_edio_data_out0", "gpio0_4"),
> + _PIN(0x15c, "SPI0_CS0", 5, 7, "spi0_cs0", "mmc2_sdwp",
> "I2C1_SCL", "ehrpwm0_synci", "pr1_uart0_txd", "pr1_edio_data_in1",
> "pr1_edio_data_out1", "gpio0_5"),
> + _PIN(0x160, "SPI0_CS1", 6, 7, "spi0_cs1", "uart3_rxd",
> "eCAP1_in_PWM1_out", "mcc0_pow", "xdm_event_intr2", "mmc0_sdcd", "EMU4",
> "gpio0_6"),
> + _PIN(0x164, "ECAP0_IN_PWM0_OUT",7, 7, "eCAP0_in_PWM0_out", "uart3_txd",
> "spi1_cs1", "pr1_ecap0_ecap_capin_apwm_o", "spi1_sclk", "mmc0_sdwp",
> "xdma_event_intr2", "gpio0_7"),
> + _PIN(0x168, "UART0_CTSn", 40, 7, "uart0_ctsn", "uart4_rxd",
> "dcan1_tx", "I2C1_SDA", "spi1_d0", "timer7", "pr1_edc_sync0_out", "gpio1_8"),
> + _PIN(0x16c, "UART0_RTSn", 41, 7, "uart0_rtsn", "uart4_txd",
> "dcan1_rx", "I2C1_SCL", "spi1_d1", "spi1_cs0", "pr1_edc_sync1_out",
> "gpio1_9"),
> + _PIN(0x170, "UART0_rxd", 42, 7, "uart0_rxd", "spi1_cs0",
> "dcan0_tx", "I2C2_SDA", "eCAP2_in_PWM2_out", "pr1_pru1_pru_r30_14",
> "pr1_pru1_pru_r31_14", "gpio1_10"),
> + _PIN(0x174, "UART0_txd", 43, 7, "uart0_txd", "spi1_cs1",
> "dcan0_rx", "I2C2_SCL", "eCAP1_in_PWM1_out", "pr1_pru1_pru_r30_15",
> "pr1_pru1_pru_r31_15", "gpio1_11"),
> + _PIN(0x178, "UART1_CTSn", 12, 7, "uart1_ctsn", "timer6_mux1",
> "dcan0_tx", "I2C2_SDA", "spi1_cs0", "pr1_uart0_cts_n", "pr1_edc_latch0_in",
> "gpio0_12"),
> + _PIN(0x17c, "UART1_RTSn", 13, 7, "uart1_rtsn", "timer5_mux1",
> "dcan0_rx", "I2C2_SCL", "spi1_cs1", "pr1_uart0_rts_n", "pr1_edc_latch1_in",
> "gpio0_13"),
> + _PIN(0x180, "UART1_RXD", 14, 7, "uart1_rxd", "mmc1_sdwp",
> "dcan1_tx", "I2C1_SDA", NULL, "pr1_uart0_rxd", "pr1_pru1_pru_r31_16",
> "gpio0_14"),
> + _PIN(0x184, "UART1_TXD", 15, 7, "uart1_txd", "mmc2_sdwp",
> "dcan1_rx", "I2C1_SCL", NULL, "pr1_uart0_txd", "pr1_pru0_pru_r31_16",
> "gpio0_15"),
> + _PIN(0x188, "I2C0_SDA", 101, 7, "I2C0_SDA", "timer4",
> "uart2_ctsn", "eCAP2_in_PWM2_out", NULL, NULL, NULL, "gpio3_5"),
> + _PIN(0x18c, "I2C0_SCL", 102, 7, "I2C0_SCL", "timer7",
> "uart2_rtsn", "eCAP1_in_PWM1_out", NULL, NULL, NULL, "gpio3_6"),
> + _PIN(0x190, "MCASP0_ACLKX", 110, 7, "mcasp0_aclkx", "ehrpwm0A",
> NULL, "spi1_sclk", "mmc0_sdcd", "pr1_pru0_pru_r30_0", "pr1_pru0_pru_r31_0",
> "gpio3_14"),
> + _PIN(0x194, "MCASP0_FSX", 111, 7, "mcasp0_fsx", "ehrpwm0B", NULL,
> "spi1_d0", "mmc1_sdcd", "pr1_pru0_pru_r30_1", "pr1_pru0_pru_r31_1",
> "gpio3_15"),
> + _PIN(0x198, "MCASP0_AXR0", 112, 7, "mcasp0_axr0",
> "ehrpwm0_tripzone_input", NULL, "spi1_d1", "mmc2_sdcd", "pr1_pru0_pru_r30_2",
> "pr1_pru0_pru_r31_2", "gpio3_16"),
> + _PIN(0x19c, "MCASP0_AHCLKR", 113, 7, "mcasp0_ahclkr",
> "ehrpwm0_synci", "mcasp0_axr2", "spi1_cs0", "eCAP2_in_PWM2_out",
> "pr1_pru0_pru_r30_3", "pr1_pru0_pru_r31_3", "gpio3_17"),
> + _PIN(0x1a0, "MCASP0_ACLKR", 114, 7, "mcasp0_aclkr", "eQEP0A_in",
> "mcasp0_axr2", "mcasp1_aclkx", "mmc0_sdwp", "pr1_pru0_pru_r30_4",
> "pr1_pru0_pru_r31_4", "gpio3_18"),
> + _PIN(0x1a4, "MCASP0_FSR", 115, 7, "mcasp0_fsr", "eQEP0B_in",
> "mcasp0_axr3", "mcasp1_fsx", "EMU2", "pr1_pru0_pru_r30_5",
> "pr1_pru0_pru_r31_5", "gpio3_19"),
> + _PIN(0x1a8, "MCASP0_AXR1", 116, 7, "mcasp0_axr1", "eQEP0_index",
> NULL, "mcasp1_axr0", "EMU3", "pr1_pru0_pru_r30_6", "pr1_pru0_pru_r31_6",
> "gpio3_20"),
> + _PIN(0x1ac, "MCASP0_AHCLKX", 117, 7, "mcasp0_ahclkx",
> "eQEP0_strobe", "mcasp0_axr3", "mcasp1_axr1", "EMU4", "pr1_pru0_pru_r30_7",
> "pr1_pru0_pru_r31_7", "gpio3_21"),
> + _PIN(0x1b0, "XDMA_EVENT_INTR0", 19, 7, "xdma_event_intr0", NULL,
> "timer4", "clkout1", "spi1_cs1", "pr1_pru1_pru_r31_16", "EMU2", "gpio0_19"),
> + _PIN(0x1b4, "XDMA_EVENT_INTR1", 20, 7, "xdma_event_intr1", NULL,
> "tclkin", "clkout2", "timer7", "pr1_pru0_pru_r31_16", "EMU3", "gpio0_20"),
> +#if 0
> + _PIN(0x1b8, "nresetin_out", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1bc, "porz", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1c0, "nnmi", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1c4, "osc0_in", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1c8, "osc0_out", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1cc, "osc0_vss", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1d0, "tms", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1d4, "tdi", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1d8, "tdo", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1dc, "tck", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1e0, "ntrst", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> +#endif
> + _PIN(0x1e4, "EMU0", 103, 7, "EMU0", NULL, NULL, NULL, NULL,
> NULL, NULL, "gpio3_7"),
> + _PIN(0x1e8, "EMU1", 104, 0, "EMU1", NULL, NULL, NULL, NULL,
> NULL, NULL, "gpio3_8"),
> +#if 0
> + _PIN(0x1ec, "osc1_in", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1f0, "osc1_out", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1f4, "osc1_vss", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1f8, "rtc_porz", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x1fc, "pmic_power_en", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x200, "ext_wakeup", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x204, "enz_kaldo_1p8v", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> +#endif
> + _PIN(0x208, "USB0_DM", 0, 0, "USB0_DM", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x20c, "USB0_DP", 0, 0, "USB0_DP", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x210, "USB0_CE", 0, 0, "USB0_CE", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x214, "USB0_ID", 0, 0, "USB0_ID", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x218, "USB0_VBUS", 0, 0, "USB0_VBUS", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x21c, "USB0_DRVVBUS", 18, 7, "USB0_DRVVBUS", NULL, NULL,
> NULL, NULL, NULL, NULL, "gpio0_18"),
> + _PIN(0x220, "USB1_DM", 0, 0, "USB1_DM", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x224, "USB1_DP", 0, 0, "USB1_DP", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x228, "USB1_CE", 0, 0, "USB1_CE", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x22c, "USB1_ID", 0, 0, "USB1_ID", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x230, "USB1_VBUS", 0, 0, "USB1_VBUS", NULL, NULL, NULL,
> NULL, NULL, NULL, NULL),
> + _PIN(0x234, "USB1_DRVVBUS", 109, 7, "USB1_DRVVBUS", NULL, NULL,
> NULL, NULL, NULL, NULL, "gpio3_13"),
> +#if 0
> + _PIN(0x238, "ddr_resetn", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x23c, "ddr_csn0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x240, "ddr_cke", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x244, "ddr_ck", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x248, "ddr_nck", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x24c, "ddr_casn", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x250, "ddr_rasn", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x254, "ddr_wen", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x258, "ddr_ba0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x25c, "ddr_ba1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x260, "ddr_ba2", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x264, "ddr_a0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x268, "ddr_a1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x26c, "ddr_a2", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x270, "ddr_a3", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x274, "ddr_a4", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x278, "ddr_a5", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x27c, "ddr_a6", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x280, "ddr_a7", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x284, "ddr_a8", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x288, "ddr_a9", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x28c, "ddr_a10", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x290, "ddr_a11", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x294, "ddr_a12", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x298, "ddr_a13", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x29c, "ddr_a14", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2a0, "ddr_a15", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2a4, "ddr_odt", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2a8, "ddr_d0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2ac, "ddr_d1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2b0, "ddr_d2", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2b4, "ddr_d3", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2b8, "ddr_d4", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2bc, "ddr_d5", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2c0, "ddr_d6", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2c4, "ddr_d7", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2c8, "ddr_d8", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2cc, "ddr_d9", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2d0, "ddr_d10", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2d4, "ddr_d11", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2d8, "ddr_d12", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2dc, "ddr_d13", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2e0, "ddr_d14", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2e4, "ddr_d15", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2e8, "ddr_dqm0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2ec, "ddr_dqm1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2f0, "ddr_dqs0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2f4, "ddr_dqsn0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2f8, "ddr_dqs1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x2fc, "ddr_dqsn1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x300, "ddr_vref", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x304, "ddr_vtp", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x308, "ddr_strben0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x30c, "ddr_strben1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x32c, "ain0", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x328, "ain1", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x324, "ain2", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x320, "ain3", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x31c, "ain4", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x318, "ain5", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x314, "ain6", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x310, "ain7", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x330, "vrefp", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x334, "vrefn", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x338, "avdd", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x33c, "avss", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x340, "iforce", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x344, "vsense", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> + _PIN(0x348, "testout", 0, 0, NULL, NULL, NULL, NULL, NULL,
> NULL, NULL, NULL),
> +#endif
> + { .ballname = NULL },
> +};
> +
> +const struct ti_pinmux_device ti_am335x_pinmux_dev = {
> + .padconf_muxmode_mask = 0x7,
> + .padconf_sate_mask = 0x78,
> + .padstate = ti_padstate_devmap,
> + .padconf = ti_padconf_devmap,
> +};
> diff --git a/freebsd/sys/arm/ti/am335x/am335x_scm_padconf.h
> b/freebsd/sys/arm/ti/am335x/am335x_scm_padconf.h
> new file mode 100644
> index 00000000..b1fa22ba
> --- /dev/null
> +++ b/freebsd/sys/arm/ti/am335x/am335x_scm_padconf.h
> @@ -0,0 +1,47 @@
> +/*-
> + * Copyright (c) 2012 Damjan Marion <dmar...@freebsd.org>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + *
> + * $FreeBSD$
> + */
> +
> +#ifndef AM335X_SCM_PADCONF_H
> +#define AM335X_SCM_PADCONF_H
> +
> +#define SLEWCTRL (0x01 << 6) /* faster(0) or slower(1) slew rate. */
> +#define RXACTIVE (0x01 << 5) /* Input enable value for the Pad */
> +#define PULLTYPESEL (0x01 << 4) /* Pad pullup/pulldown type selection */
> +#define PULLUDEN (0x01 << 3) /* Pullup/pulldown disabled */
> +
> +#define PADCONF_OUTPUT (PULLUDEN)
> +#define PADCONF_OUTPUT_PULLUP (PULLTYPESEL)
> +#define PADCONF_OUTPUT_PULLDOWN (0)
> +#define PADCONF_INPUT (RXACTIVE | PULLUDEN)
> +#define PADCONF_INPUT_PULLUP (RXACTIVE | PULLTYPESEL)
> +#define PADCONF_INPUT_PULLDOWN (RXACTIVE)
> +#define PADCONF_INPUT_PULLUP_SLOW (PADCONF_INPUT_PULLUP | SLEWCTRL)
> +
> +extern const struct ti_pinmux_device ti_am335x_pinmux_dev;
> +
> +#endif /* AM335X_SCM_PADCONF_H */
> diff --git a/freebsd/sys/arm/ti/omap4/omap4_scm_padconf.h
> b/freebsd/sys/arm/ti/omap4/omap4_scm_padconf.h
> new file mode 100644
> index 00000000..adee0a79
> --- /dev/null
> +++ b/freebsd/sys/arm/ti/omap4/omap4_scm_padconf.h
> @@ -0,0 +1,83 @@
> +/*-
> + * Copyright (c) 2011
> + * Ben Gray <ben.r.g...@gmail.com>.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * 3. The name of the company nor the name of the author may be used to
> + * endorse or promote products derived from this software without specific
> + * prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
> TO,
> + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
> PROFITS;
> + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + * $FreeBSD$
> + */
> +
> +#ifndef OMAP4_SCM_PADCONF_H
> +#define OMAP4_SCM_PADCONF_H
> +
> +#define CONTROL_PADCONF_WAKEUP_EVENT (1UL << 15)
> +#define CONTROL_PADCONF_WAKEUP_ENABLE (1UL << 14)
> +#define CONTROL_PADCONF_OFF_PULL_UP (1UL << 13)
> +#define CONTROL_PADCONF_OFF_PULL_ENABLE (1UL << 12)
> +#define CONTROL_PADCONF_OFF_OUT_HIGH (1UL << 11)
> +#define CONTROL_PADCONF_OFF_OUT_ENABLE (1UL << 10)
> +#define CONTROL_PADCONF_OFF_ENABLE (1UL << 9)
> +#define CONTROL_PADCONF_INPUT_ENABLE (1UL << 8)
> +#define CONTROL_PADCONF_PULL_UP (1UL << 4)
> +#define CONTROL_PADCONF_PULL_ENABLE (1UL << 3)
> +#define CONTROL_PADCONF_MUXMODE_MASK (0x7)
> +
> +#define CONTROL_PADCONF_SATE_MASK ( CONTROL_PADCONF_WAKEUP_EVENT \
> + | CONTROL_PADCONF_WAKEUP_ENABLE \
> + | CONTROL_PADCONF_OFF_PULL_UP \
> + | CONTROL_PADCONF_OFF_PULL_ENABLE \
> + | CONTROL_PADCONF_OFF_OUT_HIGH \
> + | CONTROL_PADCONF_OFF_OUT_ENABLE \
> + | CONTROL_PADCONF_OFF_ENABLE \
> + | CONTROL_PADCONF_INPUT_ENABLE \
> + | CONTROL_PADCONF_PULL_UP \
> + | CONTROL_PADCONF_PULL_ENABLE )
> +
> +/* Active pin states */
> +#define PADCONF_PIN_OUTPUT 0
> +#define PADCONF_PIN_INPUT CONTROL_PADCONF_INPUT_ENABLE
> +#define PADCONF_PIN_INPUT_PULLUP ( CONTROL_PADCONF_INPUT_ENABLE \
> + | CONTROL_PADCONF_PULL_ENABLE \
> + | CONTROL_PADCONF_PULL_UP)
> +#define PADCONF_PIN_INPUT_PULLDOWN ( CONTROL_PADCONF_INPUT_ENABLE \
> + | CONTROL_PADCONF_PULL_ENABLE )
> +
> +/* Off mode states */
> +#define PADCONF_PIN_OFF_NONE 0
> +#define PADCONF_PIN_OFF_OUTPUT_HIGH ( CONTROL_PADCONF_OFF_ENABLE \
> + | CONTROL_PADCONF_OFF_OUT_ENABLE \
> + | CONTROL_PADCONF_OFF_OUT_HIGH)
> +#define PADCONF_PIN_OFF_OUTPUT_LOW ( CONTROL_PADCONF_OFF_ENABLE \
> + | CONTROL_PADCONF_OFF_OUT_ENABLE)
> +#define PADCONF_PIN_OFF_INPUT_PULLUP ( CONTROL_PADCONF_OFF_ENABLE \
> + | CONTROL_PADCONF_OFF_PULL_ENABLE \
> + | CONTROL_PADCONF_OFF_PULL_UP)
> +#define PADCONF_PIN_OFF_INPUT_PULLDOWN ( CONTROL_PADCONF_OFF_ENABLE \
> + | CONTROL_PADCONF_OFF_PULL_ENABLE)
> +#define PADCONF_PIN_OFF_WAKEUPENABLE CONTROL_PADCONF_WAKEUP_ENABLE
> +
> +extern const struct ti_pinmux_device omap4_pinmux_dev;
> +
> +#endif /* OMAP4_SCM_PADCONF_H */
> diff --git a/freebsd/sys/arm/ti/ti_pinmux.c b/freebsd/sys/arm/ti/ti_pinmux.c
> new file mode 100644
> index 00000000..af47d074
> --- /dev/null
> +++ b/freebsd/sys/arm/ti/ti_pinmux.c
> @@ -0,0 +1,463 @@
> +#include <machine/rtems-bsd-kernel-space.h>
> +
> +/*
> + * Copyright (c) 2010
> + * Ben Gray <ben.r.g...@gmail.com>.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * 3. All advertising materials mentioning features or use of this software
> + * must display the following acknowledgement:
> + * This product includes software developed by Ben Gray.
> + * 4. The name of the company nor the name of the author may be used to
> + * endorse or promote products derived from this software without specific
> + * prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
> TO,
> + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
> PROFITS;
> + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/**
> + * Exposes pinmux module to pinctrl-compatible interface
> + */
> +#include <sys/cdefs.h>
> +__FBSDID("$FreeBSD$");
> +
> +#include <sys/param.h>
> +#include <sys/systm.h>
> +#include <sys/kernel.h>
> +#include <sys/module.h>
> +#include <sys/bus.h>
> +#include <rtems/bsd/sys/resource.h>
> +#include <sys/rman.h>
> +#include <sys/lock.h>
> +#include <sys/mutex.h>
> +
> +#include <machine/bus.h>
> +#include <machine/resource.h>
> +
> +#include <dev/ofw/openfirm.h>
> +#include <dev/ofw/ofw_bus.h>
> +#include <dev/ofw/ofw_bus_subr.h>
> +#include <dev/fdt/fdt_pinctrl.h>
> +
> +#include <arm/ti/omap4/omap4_scm_padconf.h>
> +#include <arm/ti/am335x/am335x_scm_padconf.h>
> +#include <arm/ti/ti_cpuid.h>
> +#include "ti_pinmux.h"
> +
> +struct pincfg {
> + uint32_t reg;
> + uint32_t conf;
> +};
> +
> +static struct resource_spec ti_pinmux_res_spec[] = {
> + { SYS_RES_MEMORY, 0, RF_ACTIVE }, /* Control memory
> window */
> + { -1, 0 }
> +};
> +
> +static struct ti_pinmux_softc *ti_pinmux_sc;
> +
> +#define ti_pinmux_read_2(sc, reg) \
> + bus_space_read_2((sc)->sc_bst, (sc)->sc_bsh, (reg))
> +#define ti_pinmux_write_2(sc, reg, val) \
> + bus_space_write_2((sc)->sc_bst, (sc)->sc_bsh, (reg), (val))
> +#define ti_pinmux_read_4(sc, reg) \
> + bus_space_read_4((sc)->sc_bst, (sc)->sc_bsh, (reg))
> +#define ti_pinmux_write_4(sc, reg, val) \
> + bus_space_write_4((sc)->sc_bst, (sc)->sc_bsh, (reg), (val))
> +
> +
> +/**
> + * ti_padconf_devmap - Array of pins, should be defined one per SoC
> + *
> + * This array is typically defined in one of the targeted *_scm_pinumx.c
> + * files and is specific to the given SoC platform. Each entry in the array
> + * corresponds to an individual pin.
> + */
> +static const struct ti_pinmux_device *ti_pinmux_dev;
> +
> +
> +/**
> + * ti_pinmux_padconf_from_name - searches the list of pads and returns
> entry
> + * with matching ball name.
> + * @ballname: the name of the ball
> + *
> + * RETURNS:
> + * A pointer to the matching padconf or NULL if the ball wasn't found.
> + */
> +static const struct ti_pinmux_padconf*
> +ti_pinmux_padconf_from_name(const char *ballname)
> +{
> + const struct ti_pinmux_padconf *padconf;
> +
> + padconf = ti_pinmux_dev->padconf;
> + while (padconf->ballname != NULL) {
> + if (strcmp(ballname, padconf->ballname) == 0)
> + return(padconf);
> + padconf++;
> + }
> +
> + return (NULL);
> +}
> +
> +/**
> + * ti_pinmux_padconf_set_internal - sets the muxmode and state for a
> pad/pin
> + * @padconf: pointer to the pad structure
> + * @muxmode: the name of the mode to use for the pin, i.e. "uart1_rx"
> + * @state: the state to put the pad/pin in, i.e. PADCONF_PIN_???
> + *
> + *
> + * LOCKING:
> + * Internally locks it's own context.
> + *
> + * RETURNS:
> + * 0 on success.
> + * EINVAL if pin requested is outside valid range or already in use.
> + */
> +static int
> +ti_pinmux_padconf_set_internal(struct ti_pinmux_softc *sc,
> + const struct ti_pinmux_padconf *padconf,
> + const char *muxmode, unsigned int state)
> +{
> + unsigned int mode;
> + uint16_t reg_val;
> +
> + /* populate the new value for the PADCONF register */
> + reg_val = (uint16_t)(state & ti_pinmux_dev->padconf_sate_mask);
> +
> + /* find the new mode requested */
> + for (mode = 0; mode < 8; mode++) {
> + if ((padconf->muxmodes[mode] != NULL) &&
> + (strcmp(padconf->muxmodes[mode], muxmode) == 0)) {
> + break;
> + }
> + }
> +
> + /* couldn't find the mux mode */
> + if (mode >= 8) {
> + printf("Invalid mode \"%s\"\n", muxmode);
> + return (EINVAL);
> + }
> +
> + /* set the mux mode */
> + reg_val |= (uint16_t)(mode & ti_pinmux_dev->padconf_muxmode_mask);
> +
> + if (bootverbose)
> + device_printf(sc->sc_dev, "setting internal %x for %s\n",
> + reg_val, muxmode);
> + /* write the register value (16-bit writes) */
> + ti_pinmux_write_2(sc, padconf->reg_off, reg_val);
> +
> + return (0);
> +}
> +
> +/**
> + * ti_pinmux_padconf_set - sets the muxmode and state for a pad/pin
> + * @padname: the name of the pad, i.e. "c12"
> + * @muxmode: the name of the mode to use for the pin, i.e. "uart1_rx"
> + * @state: the state to put the pad/pin in, i.e. PADCONF_PIN_???
> + *
> + *
> + * LOCKING:
> + * Internally locks it's own context.
> + *
> + * RETURNS:
> + * 0 on success.
> + * EINVAL if pin requested is outside valid range or already in use.
> + */
> +int
> +ti_pinmux_padconf_set(const char *padname, const char *muxmode, unsigned int
> state)
> +{
> + const struct ti_pinmux_padconf *padconf;
> +
> + if (!ti_pinmux_sc)
> + return (ENXIO);
> +
> + /* find the pin in the devmap */
> + padconf = ti_pinmux_padconf_from_name(padname);
> + if (padconf == NULL)
> + return (EINVAL);
> +
> + return (ti_pinmux_padconf_set_internal(ti_pinmux_sc, padconf, muxmode,
> state));
> +}
> +
> +/**
> + * ti_pinmux_padconf_get - gets the muxmode and state for a pad/pin
> + * @padname: the name of the pad, i.e. "c12"
> + * @muxmode: upon return will contain the name of the muxmode of the pin
> + * @state: upon return will contain the state of the pad/pin
> + *
> + *
> + * LOCKING:
> + * Internally locks it's own context.
> + *
> + * RETURNS:
> + * 0 on success.
> + * EINVAL if pin requested is outside valid range or already in use.
> + */
> +int
> +ti_pinmux_padconf_get(const char *padname, const char **muxmode,
> + unsigned int *state)
> +{
> + const struct ti_pinmux_padconf *padconf;
> + uint16_t reg_val;
> +
> + if (!ti_pinmux_sc)
> + return (ENXIO);
> +
> + /* find the pin in the devmap */
> + padconf = ti_pinmux_padconf_from_name(padname);
> + if (padconf == NULL)
> + return (EINVAL);
> +
> + /* read the register value (16-bit reads) */
> + reg_val = ti_pinmux_read_2(ti_pinmux_sc, padconf->reg_off);
> +
> + /* save the state */
> + if (state)
> + *state = (reg_val & ti_pinmux_dev->padconf_sate_mask);
> +
> + /* save the mode */
> + if (muxmode)
> + *muxmode = padconf->muxmodes[(reg_val &
> ti_pinmux_dev->padconf_muxmode_mask)];
> +
> + return (0);
> +}
> +
> +/**
> + * ti_pinmux_padconf_set_gpiomode - converts a pad to GPIO mode.
> + * @gpio: the GPIO pin number (0-195)
> + * @state: the state to put the pad/pin in, i.e. PADCONF_PIN_???
> + *
> + *
> + *
> + * LOCKING:
> + * Internally locks it's own context.
> + *
> + * RETURNS:
> + * 0 on success.
> + * EINVAL if pin requested is outside valid range or already in use.
> + */
> +int
> +ti_pinmux_padconf_set_gpiomode(uint32_t gpio, unsigned int state)
> +{
> + const struct ti_pinmux_padconf *padconf;
> + uint16_t reg_val;
> +
> + if (!ti_pinmux_sc)
> + return (ENXIO);
> +
> + /* find the gpio pin in the padconf array */
> + padconf = ti_pinmux_dev->padconf;
> + while (padconf->ballname != NULL) {
> + if (padconf->gpio_pin == gpio)
> + break;
> + padconf++;
> + }
> + if (padconf->ballname == NULL)
> + return (EINVAL);
> +
> + /* populate the new value for the PADCONF register */
> + reg_val = (uint16_t)(state & ti_pinmux_dev->padconf_sate_mask);
> +
> + /* set the mux mode */
> + reg_val |= (uint16_t)(padconf->gpio_mode &
> ti_pinmux_dev->padconf_muxmode_mask);
> +
> + /* write the register value (16-bit writes) */
> + ti_pinmux_write_2(ti_pinmux_sc, padconf->reg_off, reg_val);
> +
> + return (0);
> +}
> +
> +/**
> + * ti_pinmux_padconf_get_gpiomode - gets the current GPIO mode of the pin
> + * @gpio: the GPIO pin number (0-195)
> + * @state: upon return will contain the state
> + *
> + *
> + *
> + * LOCKING:
> + * Internally locks it's own context.
> + *
> + * RETURNS:
> + * 0 on success.
> + * EINVAL if pin requested is outside valid range or not configured as
> GPIO.
> + */
> +int
> +ti_pinmux_padconf_get_gpiomode(uint32_t gpio, unsigned int *state)
> +{
> + const struct ti_pinmux_padconf *padconf;
> + uint16_t reg_val;
> +
> + if (!ti_pinmux_sc)
> + return (ENXIO);
> +
> + /* find the gpio pin in the padconf array */
> + padconf = ti_pinmux_dev->padconf;
> + while (padconf->ballname != NULL) {
> + if (padconf->gpio_pin == gpio)
> + break;
> + padconf++;
> + }
> + if (padconf->ballname == NULL)
> + return (EINVAL);
> +
> + /* read the current register settings */
> + reg_val = ti_pinmux_read_2(ti_pinmux_sc, padconf->reg_off);
> +
> + /* check to make sure the pins is configured as GPIO in the first state
> */
> + if ((reg_val & ti_pinmux_dev->padconf_muxmode_mask) !=
> padconf->gpio_mode)
> + return (EINVAL);
> +
> + /* read and store the reset of the state, i.e. pull-up, pull-down, etc
> */
> + if (state)
> + *state = (reg_val & ti_pinmux_dev->padconf_sate_mask);
> +
> + return (0);
> +}
> +
> +static int
> +ti_pinmux_configure_pins(device_t dev, phandle_t cfgxref)
> +{
> + struct pincfg *cfgtuples, *cfg;
> + phandle_t cfgnode;
> + int i, ntuples;
> + static struct ti_pinmux_softc *sc;
> +
> + sc = device_get_softc(dev);
> + cfgnode = OF_node_from_xref(cfgxref);
> + ntuples = OF_getencprop_alloc_multi(cfgnode, "pinctrl-single,pins",
> + sizeof(*cfgtuples), (void **)&cfgtuples);
> +
> + if (ntuples < 0)
> + return (ENOENT);
> +
> + if (ntuples == 0)
> + return (0); /* Empty property is not an error. */
> +
> + for (i = 0, cfg = cfgtuples; i < ntuples; i++, cfg++) {
> + if (bootverbose) {
> + char name[32];
> + OF_getprop(cfgnode, "name", &name, sizeof(name));
> + printf("%16s: muxreg 0x%04x muxval 0x%02x\n",
> + name, cfg->reg, cfg->conf);
> + }
> +
> + /* write the register value (16-bit writes) */
> + ti_pinmux_write_2(sc, cfg->reg, cfg->conf);
> + }
> +
> + OF_prop_free(cfgtuples);
> +
> + return (0);
> +}
> +
> +/*
> + * Device part of OMAP SCM driver
> + */
> +
> +static int
> +ti_pinmux_probe(device_t dev)
> +{
> + if (!ofw_bus_status_okay(dev))
> + return (ENXIO);
> +
> + if (!ofw_bus_is_compatible(dev, "pinctrl-single"))
> + return (ENXIO);
> +
> + if (ti_pinmux_sc) {
> + printf("%s: multiple pinctrl modules in device tree data,
> ignoring\n",
> + __func__);
> + return (EEXIST);
> + }
> + switch (ti_chip()) {
> +#ifdef SOC_OMAP4
> + case CHIP_OMAP_4:
> + ti_pinmux_dev = &omap4_pinmux_dev;
> + break;
> +#endif
> +#ifdef SOC_TI_AM335X
> + case CHIP_AM335X:
> + ti_pinmux_dev = &ti_am335x_pinmux_dev;
> + break;
> +#endif
> + default:
> + printf("Unknown CPU in pinmux\n");
> + return (ENXIO);
> + }
> +
> +
> + device_set_desc(dev, "TI Pinmux Module");
> + return (BUS_PROBE_DEFAULT);
> +}
> +
> +/**
> + * ti_pinmux_attach - attaches the pinmux to the simplebus
> + * @dev: new device
> + *
> + * RETURNS
> + * Zero on success or ENXIO if an error occuried.
> + */
> +static int
> +ti_pinmux_attach(device_t dev)
> +{
> + struct ti_pinmux_softc *sc = device_get_softc(dev);
> +
> +#if 0
> + if (ti_pinmux_sc)
> + return (ENXIO);
> +#endif
> +
> + sc->sc_dev = dev;
> +
> + if (bus_alloc_resources(dev, ti_pinmux_res_spec, sc->sc_res)) {
> + device_printf(dev, "could not allocate resources\n");
> + return (ENXIO);
> + }
> +
> + sc->sc_bst = rman_get_bustag(sc->sc_res[0]);
> + sc->sc_bsh = rman_get_bushandle(sc->sc_res[0]);
> +
> + if (ti_pinmux_sc == NULL)
> + ti_pinmux_sc = sc;
> +
> + fdt_pinctrl_register(dev, "pinctrl-single,pins");
> + fdt_pinctrl_configure_tree(dev);
> +
> + return (0);
> +}
> +
> +static device_method_t ti_pinmux_methods[] = {
> + DEVMETHOD(device_probe, ti_pinmux_probe),
> + DEVMETHOD(device_attach, ti_pinmux_attach),
> +
> + /* fdt_pinctrl interface */
> + DEVMETHOD(fdt_pinctrl_configure, ti_pinmux_configure_pins),
> + { 0, 0 }
> +};
> +
> +static driver_t ti_pinmux_driver = {
> + "ti_pinmux",
> + ti_pinmux_methods,
> + sizeof(struct ti_pinmux_softc),
> +};
> +
> +static devclass_t ti_pinmux_devclass;
> +
> +DRIVER_MODULE(ti_pinmux, simplebus, ti_pinmux_driver, ti_pinmux_devclass, 0,
> 0);
> diff --git a/freebsd/sys/arm/ti/ti_pinmux.h b/freebsd/sys/arm/ti/ti_pinmux.h
> new file mode 100644
> index 00000000..c299c494
> --- /dev/null
> +++ b/freebsd/sys/arm/ti/ti_pinmux.h
> @@ -0,0 +1,80 @@
> +/*
> + * Copyright (c) 2010
> + * Ben Gray <ben.r.g...@gmail.com>.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * 3. All advertising materials mentioning features or use of this software
> + * must display the following acknowledgement:
> + * This product includes software developed by Ben Gray.
> + * 4. The name of the company nor the name of the author may be used to
> + * endorse or promote products derived from this software without specific
> + * prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
> + * IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
> TO,
> + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
> PROFITS;
> + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + * $FreeBSD$
> + */
> +
> +
> +/**
> + * Functions to configure the PIN multiplexing on the chip.
> + *
> + * This is different from the GPIO module in that it is used to configure
> the
> + * pins between modules not just GPIO input output.
> + *
> + */
> +#ifndef _TI_PINMUX_H_
> +#define _TI_PINMUX_H_
> +
> +struct ti_pinmux_padconf {
> + uint16_t reg_off;
> + uint16_t gpio_pin;
> + uint16_t gpio_mode;
> + const char *ballname;
> + const char *muxmodes[8];
> +};
> +
> +struct ti_pinmux_padstate {
> + const char *state;
> + uint16_t reg;
> +};
> +
> +struct ti_pinmux_device {
> + uint16_t padconf_muxmode_mask;
> + uint16_t padconf_sate_mask;
> + const struct ti_pinmux_padstate *padstate;
> + const struct ti_pinmux_padconf *padconf;
> +};
> +
> +struct ti_pinmux_softc {
> + device_t sc_dev;
> + struct resource * sc_res[4];
> + bus_space_tag_t sc_bst;
> + bus_space_handle_t sc_bsh;
> +};
> +
> +int ti_pinmux_padconf_set(const char *padname, const char *muxmode,
> + unsigned int state);
> +int ti_pinmux_padconf_get(const char *padname, const char **muxmode,
> + unsigned int *state);
> +int ti_pinmux_padconf_set_gpiomode(uint32_t gpio, unsigned int state);
> +int ti_pinmux_padconf_get_gpiomode(uint32_t gpio, unsigned int *state);
> +
> +#endif /* _TI_SCM_H_ */
> diff --git a/freebsd/sys/dev/fdt/fdt_pinctrl.c
> b/freebsd/sys/dev/fdt/fdt_pinctrl.c
> new file mode 100644
> index 00000000..c2e0c612
> --- /dev/null
> +++ b/freebsd/sys/dev/fdt/fdt_pinctrl.c
> @@ -0,0 +1,160 @@
> +#include <machine/rtems-bsd-kernel-space.h>
> +
> +/*-
> + * Copyright (c) 2014 Ian Lepore <i...@freebsd.org>
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + *
> + * $FreeBSD$
> + */
> +
> +#include <sys/cdefs.h>
> +#include <sys/param.h>
> +
> +#include <dev/ofw/ofw_bus.h>
> +#include <dev/ofw/ofw_bus_subr.h>
> +
> +#include <rtems/bsd/local/fdt_pinctrl_if.h>
> +
> +#include <dev/fdt/fdt_common.h>
> +#include <dev/fdt/fdt_pinctrl.h>
> +
> +int
> +fdt_pinctrl_configure(device_t client, u_int index)
> +{
> + device_t pinctrl;
> + phandle_t *configs;
> + int i, nconfigs;
> + char name[16];
> +
> + snprintf(name, sizeof(name), "pinctrl-%u", index);
> + nconfigs = OF_getencprop_alloc_multi(ofw_bus_get_node(client), name,
> + sizeof(*configs), (void **)&configs);
> + if (nconfigs < 0)
> + return (ENOENT);
> + if (nconfigs == 0)
> + return (0); /* Empty property is documented as valid. */
> + for (i = 0; i < nconfigs; i++) {
> + if ((pinctrl = OF_device_from_xref(configs[i])) != NULL)
> + FDT_PINCTRL_CONFIGURE(pinctrl, configs[i]);
> + }
> + OF_prop_free(configs);
> + return (0);
> +}
> +
> +int
> +fdt_pinctrl_configure_by_name(device_t client, const char * name)
> +{
> + char * names;
> + int i, offset, nameslen;
> +
> + nameslen = OF_getprop_alloc(ofw_bus_get_node(client), "pinctrl-names",
> + (void **)&names);
> + if (nameslen <= 0)
> + return (ENOENT);
> + for (i = 0, offset = 0; offset < nameslen; i++) {
> + if (strcmp(name, &names[offset]) == 0)
> + break;
> + offset += strlen(&names[offset]) + 1;
> + }
> + OF_prop_free(names);
> + if (offset < nameslen)
> + return (fdt_pinctrl_configure(client, i));
> + else
> + return (ENOENT);
> +}
> +
> +static int
> +pinctrl_register_children(device_t pinctrl, phandle_t parent,
> + const char *pinprop)
> +{
> + phandle_t node;
> +
> + /*
> + * Recursively descend from parent, looking for nodes that have the
> + * given property, and associate the pinctrl device_t with each one.
> + */
> + for (node = OF_child(parent); node != 0; node = OF_peer(node)) {
> + pinctrl_register_children(pinctrl, node, pinprop);
> + if (pinprop == NULL || OF_hasprop(node, pinprop)) {
> + OF_device_register_xref(OF_xref_from_node(node),
> + pinctrl);
> + }
> + }
> + return (0);
> +}
> +
> +int
> +fdt_pinctrl_register(device_t pinctrl, const char *pinprop)
> +{
> + phandle_t node;
> + int ret;
> +
> + TSENTER();
> + node = ofw_bus_get_node(pinctrl);
> + OF_device_register_xref(OF_xref_from_node(node), pinctrl);
> + ret = pinctrl_register_children(pinctrl, node, pinprop);
> + TSEXIT();
> +
> + return (ret);
> +}
> +
> +static int
> +pinctrl_configure_children(device_t pinctrl, phandle_t parent)
> +{
> + phandle_t node, *configs;
> + int i, nconfigs;
> +
> + TSENTER();
> +
> + for (node = OF_child(parent); node != 0; node = OF_peer(node)) {
> + if (!ofw_bus_node_status_okay(node))
> + continue;
> + pinctrl_configure_children(pinctrl, node);
> + nconfigs = OF_getencprop_alloc_multi(node, "pinctrl-0",
> + sizeof(*configs), (void **)&configs);
> + if (nconfigs <= 0)
> + continue;
> + if (bootverbose) {
> + char name[32];
> + OF_getprop(node, "name", &name, sizeof(name));
> + printf("Processing %d pin-config node(s) in pinctrl-0
> for %s\n",
> + nconfigs, name);
> + }
> + for (i = 0; i < nconfigs; i++) {
> + if (OF_device_from_xref(configs[i]) == pinctrl)
> + FDT_PINCTRL_CONFIGURE(pinctrl, configs[i]);
> + }
> + OF_prop_free(configs);
> + }
> + TSEXIT();
> + return (0);
> +}
> +
> +int
> +fdt_pinctrl_configure_tree(device_t pinctrl)
> +{
> +
> + return (pinctrl_configure_children(pinctrl, OF_peer(0)));
> +}
> +
>
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
