OK. Weird that I couldn't reproduce this by hand though. Need to build new tools so this may take a while.
--joel On Fri, Aug 3, 2018 at 9:41 AM, Sebastian Huber < sebastian.hu...@embedded-brains.de> wrote: > Please use the latest master. > > ----- Joel Sherrill <j...@rtems.org> schrieb: > > Hi > > > > I have done two recent sweeps with rtems-bsp-builder and a number of odd > > SPARC BSP build failures occur. I haven't been able to reproduce them > with > > by-hand builds. > > > > https://lists.rtems.org/pipermail/build/2018-August/000903.html > > > > > > This is the relevant part of the summary. Anyone got any ideas? These are > > not good BSPs to have build problems with. :( > > > > 8 smp sparc/gr712rc build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems- > work/bsps\ > > --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 9 smp-debug sparc/gr712rc build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 10 smp-network sparc/gr712rc build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems- > work/bsps\ > > --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 11 smp-network-debug sparc/gr712rc build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 12 smp sparc/gr740 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 13 smp-debug sparc/gr740 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 14 smp-network sparc/gr740 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 15 smp-network-debug sparc/gr740 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 16 smp sparc/leon3 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 17 smp-debug sparc/leon3 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 18 smp-network sparc/leon3 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 19 smp-network-debug sparc/leon3 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 20 smp sparc/ut699 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 21 smp-debug sparc/ut699 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 22 smp-network sparc/ut699 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 23 smp-network-debug sparc/ut699 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 24 smp sparc/ut700 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 25 smp-debug sparc/ut700 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 26 smp-network sparc/ut700 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > > > 27 smp-network-debug sparc/ut700 build: > > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems- > work/bsps\ > > --enable-rtems-debug --enable-networking --enable-smp > > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > > `mv' > > -- > Sebastian Huber, embedded brains GmbH > > Address : Dornierstr. 4, D-82178 Puchheim, Germany > Phone : +49 89 189 47 41-16 > Fax : +49 89 189 47 41-09 > E-Mail : sebastian.hu...@embedded-brains.de > PGP : Public key available on request. > > Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
