Please use the latest master. ----- Joel Sherrill <j...@rtems.org> schrieb: > Hi > > I have done two recent sweeps with rtems-bsp-builder and a number of odd > SPARC BSP build failures occur. I haven't been able to reproduce them with > by-hand builds. > > https://lists.rtems.org/pipermail/build/2018-August/000903.html > > > This is the relevant part of the summary. Anyone got any ideas? These are > not good BSPs to have build problems with. :( > > 8 smp sparc/gr712rc build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\ > --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 9 smp-debug sparc/gr712rc build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 10 smp-network sparc/gr712rc build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\ > --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 11 smp-network-debug sparc/gr712rc build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr712rc --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 12 smp sparc/gr740 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\ > --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 13 smp-debug sparc/gr740 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 14 smp-network sparc/gr740 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\ > --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 15 smp-network-debug sparc/gr740 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=gr740 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 16 smp sparc/leon3 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\ > --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 17 smp-debug sparc/leon3 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 18 smp-network sparc/leon3 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\ > --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 19 smp-network-debug sparc/leon3 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=leon3 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 20 smp sparc/ut699 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\ > --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 21 smp-debug sparc/ut699 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 22 smp-network sparc/ut699 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\ > --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 23 smp-network-debug sparc/ut699 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut699 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 24 smp sparc/ut700 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\ > --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 25 smp-debug sparc/ut700 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 26 smp-network sparc/ut700 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\ > --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv' > > 27 smp-network-debug sparc/ut700 build: > configure: /home/joel/rtems-work/rtems/configure --target=sparc-\ > rtems5 --enable-rtemsbsp=ut700 --prefix=/home/joel/rtems-work/bsps\ > --enable-rtems-debug --enable-networking --enable-smp > error: bsps/sparc/shared/start/start.S:313 Error: Unknown opcode: > `mv'
-- Sebastian Huber, embedded brains GmbH Address : Dornierstr. 4, D-82178 Puchheim, Germany Phone : +49 89 189 47 41-16 Fax : +49 89 189 47 41-09 E-Mail : sebastian.hu...@embedded-brains.de PGP : Public key available on request. Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
