On Fri, 11 May 2018, 23:59 Danxue Huang, <danxue.hu...@gmail.com> wrote:
> Hey Vijay, > > Thank you so much for answering my question! Please don't feel sorry about > that, it's great that I also got you to help me so I can figure out my > problem faster :D > > I double checked the files in my machine, there are no such files like > "kernel", "erc32" and "testsuites", do you know why do I miss these files? > Or how can I get these files? Thank you! > maybe I didn't understand the current status of set up. are you trying to run hello world ? > > Best, > Dannie > > On Fri, May 11, 2018 at 12:57 PM, Vijay Kumar Banerjee < > vijaykumar9...@gmail.com> wrote: > >> >> Hello Dannie, >> >> I guess you're looking for the testsuites direcotry under the build >> directory. >> It can be found somewhere like this >> >> $HOME/development/rtems/kernel/erc32/sparc-rtems5/c/erc32/testsuites >> >> If you're looking for the c code then you can find it under the >> RTEMS_ROOT directory. >> In my set up the root directory is here: >> >> $HOME/development/rtems/kernel/rtems/testsuites >> >> You can refer to this link to understand the directory structure properly >> . >> >> https://docs.rtems.org/branches/master/develenv/directory.html >> >> Hopefully it was helpful. >> >> regards, >> Vijay >> >> PS: Apologies to Chris, if it was disrespectful to respond to a question >> that was addressed to him. I certainly didn't mean any disrespect. >> On 11 May 2018 at 22:33, Danxue Huang <danxue.hu...@gmail.com> wrote: >> >>> Chris, >>> >>> I have managed to build the tools, but I got another question about >>> testing. I am supposed to have a "testsuites" folder in my machine from the >>> instruction but I did not find it. So I make a "test.exe" file by myself, >>> the output of running "test.exe" is as below. >>> >>> dannie@dannie-VirtualBox:~/development/rtems/4.11/sparc-rtems4.11$ >>> sparc-rtems4.11-gdb test.exe >>> GNU gdb (GDB) 7.9 >>> Copyright (C) 2015 Free Software Foundation, Inc. >>> License GPLv3+: GNU GPL version 3 or later < >>> http://gnu.org/licenses/gpl.html> >>> This is free software: you are free to change and redistribute it. >>> There is NO WARRANTY, to the extent permitted by law. Type "show >>> copying" >>> and "show warranty" for details. >>> This GDB was configured as "--host=x86_64-linux-gnu >>> --target=sparc-rtems4.11". >>> Type "show configuration" for configuration details. >>> For bug reporting instructions, please see: >>> <http://www.gnu.org/software/gdb/bugs/>. >>> Find the GDB manual and other documentation resources online at: >>> <http://www.gnu.org/software/gdb/documentation/>. >>> For help, type "help". >>> Type "apropos word" to search for commands related to "word"... >>> "/home/dannie/development/rtems/4.11/sparc-rtems4.11/test.exe": not in >>> executable format: File format not recognized >>> (gdb) tar sim >>> Connected to the simulator. >>> (gdb) load >>> No executable file specified. >>> Use the "file" or "exec-file" command. >>> (gdb) r >>> Starting program: >>> warning: No executable file specified. >>> warning: No program loaded. >>> [Inferior 1 (process 42000) exited normally] >>> (gdb) quit >>> >>> Now I think the gdb session is working, but the "test.exe" is not >>> executable since it is coded by myself (there are bugs in it). Is there any >>> way I can get the testing files? >>> >>> Thank you so much! >>> >>> -Dannie >>> >>> On Fri, May 11, 2018 at 12:07 AM, Chris Johns <chr...@rtems.org> wrote: >>> >>>> On 11/5/18 4:01 pm, Danxue Huang wrote: >>>> > Hi there, >>>> > >>>> > I got stuck on 2.5 installing a tar file ( I have attached the >>>> website below). >>>> > >>>> >>>> You can skip that section. It does not really belong in the Quick Start >>>> chapter. >>>> >>>> > https://docs.rtems.org/branches/master/rsb/quick-start.html#building >>>> > <https://docs.rtems.org/branches/master/rsb/quick-start.html#building >>>> > >>>> > >>>> > The tar file is supposed that I have downloaded in my machine, but >>>> there is not >>>> > a required .bz2 file "rtems-4.11-sparc-rtems4.11-1.tar.bz2", all my >>>> files ends >>>> > at .bz2 are as below. >>>> > >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/gmp-5.0.5.tar.bz2 >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/binutils-2.26.tar.bz2 >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/rtems-tools-25863503edb513e7501481ff2074c02bf219f519.tar.bz2 >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/binutils-2.30.tar.bz2 >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/gmp-6.1.0.tar.bz2 >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/gcc-4.9.3.tar.bz2 >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/mpfr-3.0.1.tar.bz2 >>>> > >>>> ./development/rtems/src/rtems-source-builder/rtems/sources/mpfr-3.1.4.tar.bz2 >>>> > >>>> > Is there any other way I can download the required tar file? Thank >>>> you! >>>> > >>>> >>>> You should not needed it. >>>> >>>> Have you managed to build the tools? >>>> >>>> Chris >>>> >>> >>> >>> _______________________________________________ >>> devel mailing list >>> devel@rtems.org >>> http://lists.rtems.org/mailman/listinfo/devel >>> >> >> >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
