Hey Vijay, Thank you so much for answering my question! Please don't feel sorry about that, it's great that I also got you to help me so I can figure out my problem faster :D
I double checked the files in my machine, there are no such files like "kernel", "erc32" and "testsuites", do you know why do I miss these files? Or how can I get these files? Thank you! Best, Dannie On Fri, May 11, 2018 at 12:57 PM, Vijay Kumar Banerjee < vijaykumar9...@gmail.com> wrote: > > Hello Dannie, > > I guess you're looking for the testsuites direcotry under the build > directory. > It can be found somewhere like this > > $HOME/development/rtems/kernel/erc32/sparc-rtems5/c/erc32/testsuites > > If you're looking for the c code then you can find it under the RTEMS_ROOT > directory. > In my set up the root directory is here: > > $HOME/development/rtems/kernel/rtems/testsuites > > You can refer to this link to understand the directory structure properly . > > https://docs.rtems.org/branches/master/develenv/directory.html > > Hopefully it was helpful. > > regards, > Vijay > > PS: Apologies to Chris, if it was disrespectful to respond to a question > that was addressed to him. I certainly didn't mean any disrespect. > On 11 May 2018 at 22:33, Danxue Huang <danxue.hu...@gmail.com> wrote: > >> Chris, >> >> I have managed to build the tools, but I got another question about >> testing. I am supposed to have a "testsuites" folder in my machine from the >> instruction but I did not find it. So I make a "test.exe" file by myself, >> the output of running "test.exe" is as below. >> >> dannie@dannie-VirtualBox:~/development/rtems/4.11/sparc-rtems4.11$ >> sparc-rtems4.11-gdb test.exe >> GNU gdb (GDB) 7.9 >> Copyright (C) 2015 Free Software Foundation, Inc. >> License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.h >> tml> >> This is free software: you are free to change and redistribute it. >> There is NO WARRANTY, to the extent permitted by law. Type "show copying" >> and "show warranty" for details. >> This GDB was configured as "--host=x86_64-linux-gnu >> --target=sparc-rtems4.11". >> Type "show configuration" for configuration details. >> For bug reporting instructions, please see: >> <http://www.gnu.org/software/gdb/bugs/>. >> Find the GDB manual and other documentation resources online at: >> <http://www.gnu.org/software/gdb/documentation/>. >> For help, type "help". >> Type "apropos word" to search for commands related to "word"... >> "/home/dannie/development/rtems/4.11/sparc-rtems4.11/test.exe": not in >> executable format: File format not recognized >> (gdb) tar sim >> Connected to the simulator. >> (gdb) load >> No executable file specified. >> Use the "file" or "exec-file" command. >> (gdb) r >> Starting program: >> warning: No executable file specified. >> warning: No program loaded. >> [Inferior 1 (process 42000) exited normally] >> (gdb) quit >> >> Now I think the gdb session is working, but the "test.exe" is not >> executable since it is coded by myself (there are bugs in it). Is there any >> way I can get the testing files? >> >> Thank you so much! >> >> -Dannie >> >> On Fri, May 11, 2018 at 12:07 AM, Chris Johns <chr...@rtems.org> wrote: >> >>> On 11/5/18 4:01 pm, Danxue Huang wrote: >>> > Hi there, >>> > >>> > I got stuck on 2.5 installing a tar file ( I have attached the website >>> below). >>> > >>> >>> You can skip that section. It does not really belong in the Quick Start >>> chapter. >>> >>> > https://docs.rtems.org/branches/master/rsb/quick-start.html#building >>> > <https://docs.rtems.org/branches/master/rsb/quick-start.html#building> >>> > >>> > The tar file is supposed that I have downloaded in my machine, but >>> there is not >>> > a required .bz2 file "rtems-4.11-sparc-rtems4.11-1.tar.bz2", all my >>> files ends >>> > at .bz2 are as below. >>> > >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/g >>> mp-5.0.5.tar.bz2 >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/b >>> inutils-2.26.tar.bz2 >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/r >>> tems-tools-25863503edb513e7501481ff2074c02bf219f519.tar.bz2 >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/b >>> inutils-2.30.tar.bz2 >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/g >>> mp-6.1.0.tar.bz2 >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/g >>> cc-4.9.3.tar.bz2 >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/m >>> pfr-3.0.1.tar.bz2 >>> > ./development/rtems/src/rtems-source-builder/rtems/sources/m >>> pfr-3.1.4.tar.bz2 >>> > >>> > Is there any other way I can download the required tar file? Thank you! >>> > >>> >>> You should not needed it. >>> >>> Have you managed to build the tools? >>> >>> Chris >>> >> >> >> _______________________________________________ >> devel mailing list >> devel@rtems.org >> http://lists.rtems.org/mailman/listinfo/devel >> > >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
