Hello,
its nice that you use the new Termios device API. I would be happy to receive
comments if you found something odd about it.
Contains the current GCC 4.8 or 4.9 branch HEAD all what is necessary for your
BSP?
I recently committed a patch for the Cortex-M floating point unit. There are
probably now some conflicts with your Cortex-R floating point code.
On 13/08/14 21:48, Premysl Houdek wrote:
+/**
+ * @brief Optimized idle task.
+ *
+ * This idle task sets the power mode to idle. This causes the processor
+ * clock to be stopped, while on-chip peripherals remain active.
+ * Any enabled interrupt from a peripheral or an external interrupt source
+ * will cause the processor to resume execution.
+ *
+ * To enable the idle task use the following in the system configuration:
+ *
+ * @code
+ * #include <bsp.h>
+ *
+ * #define CONFIGURE_INIT
+ *
+ * #define CONFIGURE_IDLE_TASK_BODY bsp_idle_thread
+ *
+ * #include <confdefs.h>
+ * @endcode
+ */
+void*bsp_idle_thread( uintptr_t ignored );
+
+#define BSP_CONSOLE_UART_BASE 0x4000C000U
+
+/**
+ * @brief Restarts the bsp with "addr" address
+ * @param addr Address used to restart the bsp
+ */
+void bsp_restart( const void *addr );
This is probably superfluous copy and paste stuff.
--
Sebastian Huber, embedded brains GmbH
Address : Dornierstr. 4, D-82178 Puchheim, Germany
Phone : +49 89 189 47 41-16
Fax : +49 89 189 47 41-09
E-Mail : sebastian.hu...@embedded-brains.de
PGP : Public key available on request.
Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.
_______________________________________________
devel mailing list
devel@rtems.org
http://lists.rtems.org/mailman/listinfo/devel
