On Thu, Feb 19, 2004 at 07:57:29AM +0100, Kristian Rink wrote:
>
> Hi Travis,...
>
> On Wed, 18 Feb 2004 17:11:16 -0800
> "Travis milum" <[EMAIL PROTECTED]> wrote:
>
> > I installed the 3.0r2 release this morning and have spent most of
> > the day trying to figure out how to access the drives I have
> > connected to my raid card.
>
> Hmmm, would be interesting to know which kernel you are running -
> IIRC support for the sil0680 stuff only appeared in 2.4.22...
>
> Cheers,
> Kris (who also spent some sleepless nights at work trying to get
> sil0680 running with Debian...)
>
I'm using a sil0680-based pci card for two additional drives, but
I'm using software raid.
The sil0680 is automatically recognised by the 2.4.24-1 kernel
presently in backports.
I don't know if the on-board raid works with this driver, though,
as I've not tried it.
Some dmesg here fyi:
...
SiI680: IDE controller at PCI slot 01:08.0
SiI680: chipset revision 2
SiI680: not 100% native mode: will probe irqs later
SiI680: BASE CLOCK == 133
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
...
ide2 at 0xe08f3080-0xe08f3087,0xe08f308a on irq 11
ide3 at 0xe08f30c0-0xe08f30c7,0xe08f30ca on irq 11
...
hde: attached ide-disk driver.
hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(133)
hdg: attached ide-disk driver.
hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(133)
Hope that's useful.
Cheers,
--
Mark Kent
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
