deloptes wrote: > Dan Ritter wrote: > >> Suggestions to verify/eliminate this: move it to a different USB >> port (not nearby); put it on a USB hub that get power via an AC >> adapter. > > the burners (usb2) that I have provide dual usb cable exactly for this. > as we know typical usb2 provide 0.5A, so might be your suspicion is > correct. > > but if we knew the make and model, it were easier to check.
It seems it comes with external power supply http://teac-ipd.com/dk-5000/ But what I noticed is the use of USB3 port USB device number 3 using xhci_hcd I would suggest try using usb2 port if the PC has one or unloading the xhci_hcd. Your old pc did not have usb3 for sure and you reported it worked well there.
