On Wednesday 08 May 2019 04:55:47 am john doe wrote: > On 5/8/2019 10:24 AM, Gene Heskett wrote: > > On Wednesday 08 May 2019 03:49:34 am Joe wrote: > >> On Tue, 7 May 2019 18:47:50 -0400 > >> > >> Gene Heskett <ghesk...@shentel.net> wrote: > >>> Greetings all; > >>> > >>> First it doesn't have a clue what to do with a wired network. > >>> It sure wants to hook up to all the neighborhoods wifi, all of > >>> which are secured. > >>> Second, its like stretch seems locked to ipv6 but its ipv4 for at > >>> least a hundred miles in any direction from my 10-20 in North > >>> Central WV. > >>> > >>> Third, I can't find a place to enter a netmask route or gateway, > >>> its been sleeping with dhcp for way too long. > >>> > >>> I finally find what sort of looks like the old xp network > >>> configurator but it error beeps at me to the entry of any address > >>> on my local net that isn't already taken. > >>> > >>> So how do I convince this brand new unibody HP to use a static > >>> wired network setup? > >>> > >>> In the FWIW category, it takes winders 10 about 10x longer to boot > >>> than any of my linux machines. Makes me wonder if they should have > >>> named it window-0.1 because it is boringly slow. > >> > >> Shouldn't. I have a W10 netbook, though I'm not familiar with it, > >> it had Debian installed within a week. Boot (from definitely off) > >> is less than thirty seconds. Booting should not be held up by > >> network issues. > >> > >> Open up the properties of the Ethernet adaptor, select TCP/IPv4, > >> Properties, then untick the automatic options. You should be able > >> to enter values in the address, mask and gateway boxes, and specify > >> DNS servers below. It shouldn't need a reboot. > > > > There is no place in that sequence to select TCP/IPv4 on this > > machine. If ipv6 dhcp fails, you are apparently screwed. And they > > call this an OS? Not where (and when) I went to school. > > Why not trying command line (netsh)? > netsh was able to apply a static address, but wasn't able to set a DNS. So I can ping all my machines by address, but can't get past the router because theres no dns set.
And this is windows 10 HOME EDITION, so there is no place to "run as admin" in the start menu's. Next? And I'm beat, I've been outside aiding and abetting tearing my yard all to h--- with a medium size Kubuto hoe. Finding 3 more places where the 40 yo black waterline was leaking, so we dug all the way to the house and found the final leak in some galvanized fittings some idiot used to make the connection between the black plastic and the copper entering the house. 40 years ago. Fun and games NOT. If the guy was still living, I'd consider an Alaskan divorce, well worth the cost of the cartridge. He was famous for cutting every corner he could. Anyway, in Home Edition of W10, how the heck do you get admin rights? Many thanks to all that have tolerated me so far, its very much appreciated. > -- > John Doe Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene>
