Dear All, I looked at the config-4.9.0-4-amd64 file for the current kernel:
# Native drivers # CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m # CONFIG_SENSORS_AD7314 is not set CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7310 is not set # CONFIG_SENSORS_ADT7410 is not set CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_K10TEMP=m CONFIG_SENSORS_FAM15H_POWER=m CONFIG_SENSORS_APPLESMC=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS620=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_DELL_SMM=m CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_FSCHMD=m CONFIG_SENSORS_FTSTEUTATES=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_GPIO_FAN is not set # CONFIG_SENSORS_HIH6130 is not set CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m # CONFIG_SENSORS_IIO_HWMON is not set CONFIG_SENSORS_I5500=m CONFIG_SENSORS_CORETEMP=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_JC42=m # CONFIG_SENSORS_POWR1220 is not set CONFIG_SENSORS_LINEAGE=m # CONFIG_SENSORS_LTC2945 is not set # CONFIG_SENSORS_LTC2990 is not set CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m # CONFIG_SENSORS_LTC4222 is not set CONFIG_SENSORS_LTC4245=m # CONFIG_SENSORS_LTC4260 is not set CONFIG_SENSORS_LTC4261=m CONFIG_SENSORS_MAX1111=m CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX1668=m # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX31722 is not set CONFIG_SENSORS_MAX6639=m CONFIG_SENSORS_MAX6642=m CONFIG_SENSORS_MAX6650=m # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MAX31790 is not set # CONFIG_SENSORS_MCP3021 is not set CONFIG_SENSORS_MENF21BMC_HWMON=m CONFIG_SENSORS_ADCXX=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m # CONFIG_SENSORS_LM95234 is not set CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775=m # CONFIG_SENSORS_NCT7802 is not set # CONFIG_SENSORS_NCT7904 is not set CONFIG_SENSORS_PCF8591=m # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT15 is not set CONFIG_SENSORS_SHT21=m # CONFIG_SENSORS_SHT3x is not set # CONFIG_SENSORS_SHTC1 is not set CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_EMC1403=m CONFIG_SENSORS_EMC2103=m CONFIG_SENSORS_EMC6W201=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_SCH56XX_COMMON=m CONFIG_SENSORS_SCH5627=m CONFIG_SENSORS_SCH5636=m CONFIG_SENSORS_SMM665=m # CONFIG_SENSORS_ADC128D818 is not set CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_INA3221 is not set # CONFIG_SENSORS_TC74 is not set CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m # CONFIG_SENSORS_TMP103 is not set CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83795=m # CONFIG_SENSORS_W83795_FANCTRL is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m It seems that the kernel is configured with the module m setting consistently not the internal y setting so debian does not use the built in option by default here it would seem - see discussion here https://www.linux.com/learn/intro-to-linux/2017/9/advanced-lm-sensors-tips-and-tricks-linux-0 so modifying the /etc/modules file works here. I notice that # CONFIG_SENSORS_W83795_FANCTRL is not set has been commented out and # CONFIG_SENSORS_GPIO_FAN is not set is in a similar state I will continue looking at this in more detail. Regards MF On 28 December 2017 at 12:14, Michael Fothergill < michael.fotherg...@gmail.com> wrote: > I have 3 case fans in the box here but lm-sensors only sees two of them > apparently as well as not seeing the cpu fan. > > Funny stuff. > > Regards > > MF > > On 28 December 2017 at 11:50, Michael Fothergill < > michael.fotherg...@gmail.com> wrote: > >> Dear Folks, >> >> I am running stretch on an AMD FX8350 box which uses an Arctic Freezer 13 >> cooler. >> >> I installed lm-sensors and ran the /etc module update command. >> >> The output looks like this: >> >> root@bong:/home/mikef# sensors >> asus-isa-0000 >> Adapter: ISA adapter >> cpu_fan: 0 RPM >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +21.9°C (high = +70.0°C) >> (crit = +90.0°C, hyst = +87.0°C) >> >> nouveau-pci-0700 >> Adapter: PCI adapter >> GPU core: +0.90 V (min = +0.88 V, max = +1.08 V) >> temp1: +35.0°C (high = +95.0°C, hyst = +3.0°C) >> (crit = +105.0°C, hyst = +5.0°C) >> (emerg = +135.0°C, hyst = +5.0°C) >> >> fam15h_power-pci-00c4 >> Adapter: PCI adapter >> power1: 6.75 W (crit = 125.19 W) >> >> >> it8721-isa-0290 >> >> Adapter: ISA adapter >> >> in0: +2.83 V (min = +2.02 V, max = +2.95 >> V) >> in1: +2.83 V (min = +1.68 V, max = +1.73 V) >> ALARM >> in2: +0.98 V (min = +2.40 V, max = +1.08 V) >> ALARM >> +3.3V: +3.31 V (min = +0.38 V, max = +0.96 V) >> ALARM >> in4: +0.25 V (min = +0.41 V, max = +0.20 V) ALARM >> in5: +2.51 V (min = +0.12 V, max = +0.00 V) ALARM >> in6: +1.98 V (min = +1.54 V, max = +0.59 V) ALARM >> 3VSB: +3.94 V (min = +3.31 V, max = +0.89 V) ALARM >> Vbat: +3.29 V >> fan1: 1814 RPM (min = 87 RPM) >> fan2: 0 RPM (min = 46 RPM) ALARM >> fan3: 1125 RPM (min = 29 RPM) >> temp1: +37.0°C (low = +34.0°C, high = +91.0°C) sensor = >> thermistor >> temp2: +30.0°C (low = +45.0°C, high = +9.0°C) ALARM sensor = >> thermistor >> temp3: -128.0°C (low = -60.0°C, high = +4.0°C) sensor = disabled >> intrusion0: OK >> >> root@bong:/home/mikef# >> >> The cpu fan is running at around 2500 rpm. >> >> If the connector were 3 pin rather than 4 pin could that explain the zero >> here? >> >> Suggestions on a tweak that could awaken the sensor or stimulate >> lm-sensors truffle hound hunting skills here would be appreciated. >> >> Googling around gives quite complex suggestions. >> >> Is there something simple I could try here? >> >> Regards >> >> Michael Fothergill >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >
