Dear Folks,
I am running stretch on an AMD FX8350 box which uses an Arctic Freezer 13
cooler.
I installed lm-sensors and ran the /etc module update command.
The output looks like this:
root@bong:/home/mikef# sensors
asus-isa-0000
Adapter: ISA adapter
cpu_fan: 0 RPM
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +21.9°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)
nouveau-pci-0700
Adapter: PCI adapter
GPU core: +0.90 V (min = +0.88 V, max = +1.08 V)
temp1: +35.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 6.75 W (crit = 125.19 W)
it8721-isa-0290
Adapter: ISA
adapter
in0: +2.83 V (min = +2.02 V, max = +2.95
V)
in1: +2.83 V (min = +1.68 V, max = +1.73 V)
ALARM
in2: +0.98 V (min = +2.40 V, max = +1.08 V)
ALARM
+3.3V: +3.31 V (min = +0.38 V, max = +0.96 V)
ALARM
in4: +0.25 V (min = +0.41 V, max = +0.20 V) ALARM
in5: +2.51 V (min = +0.12 V, max = +0.00 V) ALARM
in6: +1.98 V (min = +1.54 V, max = +0.59 V) ALARM
3VSB: +3.94 V (min = +3.31 V, max = +0.89 V) ALARM
Vbat: +3.29 V
fan1: 1814 RPM (min = 87 RPM)
fan2: 0 RPM (min = 46 RPM) ALARM
fan3: 1125 RPM (min = 29 RPM)
temp1: +37.0°C (low = +34.0°C, high = +91.0°C) sensor = thermistor
temp2: +30.0°C (low = +45.0°C, high = +9.0°C) ALARM sensor =
thermistor
temp3: -128.0°C (low = -60.0°C, high = +4.0°C) sensor = disabled
intrusion0: OK
root@bong:/home/mikef#
The cpu fan is running at around 2500 rpm.
If the connector were 3 pin rather than 4 pin could that explain the zero
here?
Suggestions on a tweak that could awaken the sensor or stimulate lm-sensors
truffle hound hunting skills here would be appreciated.
Googling around gives quite complex suggestions.
Is there something simple I could try here?
Regards
Michael Fothergill
