Well,
KS wrote:
Hi,
I was checking one of my systems and the SMART data for /dev/sda came
out as below. Should I change it to avoid loosing data? If not, which
information in SMART data indicates that it is time to do it?
Thanks,
KS
-------------------
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.2.34-std312-amd64] (local
build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Black
My personal experience with WD drives is that Raw_Read_Error_Rate is the
best indicator of drive degradation. In your case, it's 0, which is fine.
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
But...... It looks like your drive has never actually run any tests:
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Looks to me like the first thing you have to do is actually RUN some tests.
Try:
- smartctl -s on -A /dev/<whatever>
Miles Fidelman
--
In theory, there is no difference between theory and practice.
In practice, there is. .... Yogi Berra
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/535eeeba.30...@meetinghouse.net
