KS a écrit : > > So you mean that for now, even though the WHEN_FAILED column has > Pre-fail and Old_age values, I don't have have to worry about it?
You are misreading. Pre-fail and Old_age are in a different column (TYPE). The WHEN_FAILED column is empty. > Second drive (I believe this needs to be replaced though): > > SMART Attributes Data Structure revision number: 10 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE > 1 Raw_Read_Error_Rate POSR-- 115 097 006 - 86103872 > 3 Spin_Up_Time PO---- 097 095 000 - 0 > 4 Start_Stop_Count -O--CK 100 100 020 - 338 > 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 > 7 Seek_Error_Rate POSR-- 087 064 030 - 522263404 > 9 Power_On_Hours -O--CK 061 061 000 - 35001 > 10 Spin_Retry_Count PO--C- 100 100 097 - 0 > 12 Power_Cycle_Count -O--CK 100 100 020 - 490 > 187 Reported_Uncorrect -O--CK 100 100 000 - 0 > 189 High_Fly_Writes -O-RCK 100 100 000 - 0 > 190 Airflow_Temperature_Cel -O---K 065 045 045 Past 35 (Min/Max > 28/37) This attribute reached the threshold at least once in the past, but it does not mean that the drive was damaged and needs to be replaced. > 194 Temperature_Celsius -O---K 035 055 000 - 35 (0 19 0 0 0) > 195 Hardware_ECC_Recovered -O-RC- 069 052 000 - 237764232 > 197 Current_Pending_Sector -O--C- 100 100 000 - 0 > 198 Offline_Uncorrectable ----C- 100 100 000 - 0 > 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 > 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 > 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 > ||||||_ K auto-keep > |||||__ C event count > ||||___ R error rate > |||____ S speed/performance > ||_____ O updated online > |______ P prefailure warning -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/535ee6b1.3000...@plouf.fr.eu.org
