On Tue, 28 Oct 2003, ScruLoose wrote:
> On Mon, Oct 27, 2003 at 10:06:18PM -0500, ScruLoose wrote: > > Hi all, > > Still pluggin' away at this problem with my D-Link DFE-530TX NIC. > <snip> > NETDEV WATCHDOG: eth0: transmit timed out > eth0: Transmit timed out, status 0000, PHY status 786d, resetting... > eth0: Reset not complete yet. Trying harder. > eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. > And naturally it reports 100% packet loss. > See attached text file for more details. > > So I did some googling on that error message, and found this thread: > http://lkml.org/lkml/2003/3/31/178 > which suggests booting with the noapic option... > Tried it -- no change. (I did that right by typing "linux noapic" at > lilo's prompt, right?) > There's also some mention in that thread about a patch? > > ... At this point I'm becoming less inclined to suspect my config, and > more inclined to think something's actually wrong. > But I _know_ the hardware works. I can boot the Knoppix CD and have > a successful 100baseT network connection. (I keep doing that in order > to drag kernel sources over to the blasted machine)... > > Help? > -- I get the same thing when my system goes into 'standby mode' or apm sleep?. I hit any key and it usually restarts. I've yet to find out how to disable this. I'm using 2.4.20 custom. -Kev -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
