On Fri, Oct 18, 2013 at 9:40 AM, Tom H <tomh0...@gmail.com> wrote: > On Thu, Oct 17, 2013 at 12:57 PM, Steffen Dettmer > <steffen.dett...@gmail.com> wrote: >> but I get an error message that ifup tries to configure the VLAN >> interface twice, but the addresses are set. > I assume that you mean "auto eth3.77" not "auto eth3.107".
Yes, of course, sorry for the typo. I C&P wrongly (I did too many tests :)). > works for me in the form of > > allow-auto eth0.9 > > iface eth0.9 inet static > address 192.168.1.119 > netmask 255.255.255.0 > gateway 192.168.1.1 > > iface eth0.9 inet static > address 192.168.1.199 > netmask 255.255.255.0 I used literally this (1:1 copied), but I get the same message I had during my tests, about already existing interfaces. Unfortunately they are not stored in any /var/log/* file, so I hopefully retype correctly: [....] Configuring network interfaces...Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config ERROR: trying to add VLAN #9 to IF -:eth0- error: File exists Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config: ERROR: trying to add VLAN #9 to IF -:eth0- error: File exists done. Beside this looks as vconfig messages are unexpected (they distrub the screen layout), the big "ERROR" messages look really bad. Regards, Steffen -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caobounpk77nqalv139qn9mzuwg_ntzfzg4umgnhdqaampmn...@mail.gmail.com
