Hi all I finally got my LSI 9240-4i and the Intel SAS expander.
Unfortunately it prevents the system from booting. I only got this message on the screen: megasas: INIT adapter done hub 4-1:1.0 over-current condition on port 7 hub 4-1:1.0 over-current condition on port 8 I also got the over-current messages when the LSI card is removed. Here's the output of lsusb: Bus 004 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Nevertheless I think the module for the card should be loaded but then it somehow hangs. And after a while there are more messages which I don't understand. I have taken a picture: http://666kb.com/i/c3wf606sc1qkcvgoc.jpg Then there are lots of messages like this: INFO: task modprobe:123 blocked for more than 120 seconds. "echo 0..." disables this message Instead of modprobe:123 also modprobe:124, 125, 126, 127, 135, 137 and kworker/u:1:164, 165 are listed. I can enter the BIOS of the card just fine. It detect the disks and by defaults sets jbod option for them. This is fine because I want to use linux RAID. May this problem be the same: http://www.spinics.net/lists/raid/msg30359.html Should I try a firmware upgrade? This card was recommended to me by the list: http://lists.debian.org/debian-user/2012/05/msg00104.html I hope I can get some hints here :-) Best regards Ramon -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jp5m1n$dee$1...@dough.gmane.org
