On Wed, Aug 6, 2008 at 1:59 AM, Alexander <[EMAIL PROTECTED]> wrote: > I want create my debian home router: > > |"dslmodem" wan ppp0|<-->|eth0<-->(eth1,eth2 - shaping router)|<---|"lan" > comp1,comp2| > > I've created some configurations: > ------------------------------------------------------------------------ > 1. /etc/network/interfaces > > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > # The loopback network interface > auto lo > iface lo inet loopback > > # The primary network interface > > #allow-hotplug eth0 > auto eth0 > iface eth0 inet static > address 192.168.1.3 > netmask 255.255.255.0 > network 192.168.1.0 > broadcast 192.168.1.255 > gateway 192.168.1.1 > # dns-nameservers 192.168.1.1 > > #allow-hotplug eth1 > auto eth1 > iface eth1 inet static > up /sbin/wondershaper eth1 320 320 > down /sbin/wondershaper remove eth1 > address 192.168.1.4
try using different segment for eth1 like 192.168.2.x > > #allow-hotplug eth2 > auto eth2 > iface eth2 inet static > up /sbin/wondershaper eth2 320 320 > down /sbin/wondershaper remove eth2 > address 192.168.1.5 and eth2 too -- andika -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
