On Tue, 2008-08-05 at 14:45 -0300, Ezequiel Larrarte wrote: > First, try a simple example: > eth0 - ur interface attached to ur dsl modem > address 10.0.0.1 > netmask 255.0.0.0.0 > network 10.0.0.0 > broadcast 10.255.255.255 > > eth1 - ur lan interface > address 192.168.1.1 > netmask 255.255.255.0 > network 192.168.1.0 > broadcast 192.168.1.255 > > start ur dsl connection > # pon dsl-provider (or whatever name u ve choosen) > > masquerade packets > # iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE > > verify ur dsl connection is started > # ifconfig ppp0 | > # ip a s dev ppp0 | it s the same > > configure a lan computer > address 192.168.1.2 > netmask 255.0.0.0.0 > network 10.0.0.0 > broadcast 10.255.255.255 > gateway 192.168.1.1 > > try to ping something on the internet > $ ping 209.85.195.99 > (this is a google host)
My DSL modem is working as router and has a ppp0 iface, I have only ethX ifaces on my debian router, I don't want a firewall on my debian router, just shaping for my local network. One firewall on my dsl modem is good enough for me. DSL modem is working good, I have an internet connection on my eth0 iface, but haven't nothing in my eth1 and eth2 ifaces, how to configure routes from eth0 to my local network via eth1,2? I know hot to shape traffic via eth1,2 with wondershaper, you can see that in my /etc/network/interfaces config. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
