On Wed, 7 Nov 2007 08:49:10 -0500, I wrote: > My Etch machine at home is connected to a DSL service via a Netgear hub > (router) at home. Sometime in the last two days, the machine lost its > network connection to the outside world. It seems to be a software problem. > ... > I'd appreciate any suggestions on how to continue chasing this down.
On Wed, 07 Nov 2007 19:45:07 +0530, Raj Kiran Grandhi replied: > What is the output of "route -n"? > there should be an entry which looks like > > 0.0.0.0 192.168.0.1 0.0.0.0 ..... eth0 As expected, I see Destination Gateway Genmask Flags Metric Ref Use Iface 172.16.196.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.107.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 where 192.168.0.1 is the router. (I tried starting without vmware but it didn't help.) On Wed, 7 Nov 2007 10:04:53 -0500, Douglas A. Tutty wrote: > Are you pinging by IP or DNS name? Try by IP to remove the possibility > of a DNS problem. From a box that does work, ping debian.org and get > the IP. Then from the problem box, ping that IP and see if it goes > through. If it does, then its a DNS problem. Neither ping succeeds. I was a little surprised that I do still have name resolution. If I do "host debian.org", for example, it resolves to 192.25.206.10. (This is not coming from /etc/hosts.) On Wed, 07 Nov 2007 15:24:58 +0100, Christian Jaeger <[EMAIL PROTECTED]> suggested: > try "tcpdump -i eth0 -p -n" during pinging of outside adresses I started the tcpdump command, then started "ping debian.org", and got the following: tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 17:02:12.626080 IP 192.168.0.4.32792 > 192.168.0.1.53: 41061+ A? debian.org. (28) 17:02:12.638319 IP 192.168.0.1.53 > 192.168.0.4.32792: 41061 1/3/0 A 192.25.206.10 (105) 17:02:12.638618 IP 192.168.0.4 > 192.25.206.10: ICMP echo request, id 58398, seq 1, length 64 17:02:13.638421 IP 192.168.0.4 > 192.25.206.10: ICMP echo request, id 58398, seq 2, length 64 [more of those] 17:02:24.655745 IP 192.168.0.4 > 192.25.206.10: ICMP echo request, id 58398, seq 13, length 64 17:02:25.018434 IP 192.168.0.1.520 > 192.168.0.255.520: RIPv1, Response, length: 44 17:02:25.656605 IP 192.168.0.4 > 192.25.206.10: ICMP echo request, id 58398, seq 14, length 64 [more of those] 17:02:29.669048 IP 192.168.0.4 > 192.25.206.10: ICMP echo request, id 58398, seq 18, length 64 17:02:30.657695 arp who-has 192.168.0.1 tell 192.168.0.4 17:02:30.658311 arp reply 192.168.0.1 is-at 00:a0:c5:e2:b4:56 17:02:30.669758 IP 192.168.0.4 > 192.25.206.10: ICMP echo request, id 58398, seq 19, length 64 [more of the same; interrupt tcpdump with ^c] 42 packets captured 42 packets received by filter 0 packets dropped by kernel > if you can attach to the DSL directly It may come to that, but it would involve lugging everything upstairs. The router lives next to my wife's XP machine. Finally, on Wed, 7 Nov 2007 09:09:11 -0800 (PST), joseph lockhart wrote: > i had a similar problem here, i run my internet through a cable connection, > and had mysteriously lost the ability to connect to the internet. Probably a > completely diffrent cause but i would check dbus i have found that it wants > to shut itself off and ignores me everytime that i tell it to start running > on startup (which i have set the last several times that i have booted up) Sorry, but I don't know enough to understand this. If you can describe what steps you took to fix it (it you could at all), I could try them. I do show these processes running: /usr/bin/dbus-daemon --system /sbin/dhclient -1 -lf /var/lib/dhcp3/dhclient.eth0.leases -pf /var/run/dhclient.eth0.pid -q -e dhc_dbus=31 -d eth0 Thanks to all of you. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
