On Sun, Sep 23, 2007 at 05:14:36PM +1000, Greg Vickers wrote: > Hi all, > > I'm trying to get lirc to work with my Hauppauge on my Debian installation > on AMD64. I've used module assistant to create the lirc kernel modules and > the modules install and modprobe successfully: > # lsmod | grep lirc > lirc_i2c 14980 0 > lirc_dev 20264 1 lirc_i2c > i2c_core 27776 6 > lirc_i2c,cx88xx,bttv,i2c_algo_bit,tveeprom,i2c_nforce2
relevant logs from the module insertion would be good. ON my knoppmyth box all these modules produce pretty copious and useful output. > > Once the modules are loaded, I can't talk to the /dev/lirc file with mode2 > or anything else, so I think there may be something wrong with the udev > rules, the only entry I can find is in the /etc/udev/permissions.rules > file: > KERNEL=="lirc[0-9]*", GROUP="video" what device nodes are created? how are you taking to /dev/lirc? FTR, I'v ehad lots of trouble with hauppage IR stuff. Some of it has been physical (the jack port is pretty crappy and sometimes you have to just fiddle with the darn thing), and some of it has been software (I lost remote usage from upgrade to the next. Its curently working with the latest knoppmyth [EMAIL PROTECTED]:~$ dpkg -l lirc Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-============================================-============================================-======================================================================================================== ii lirc 0.8.0-9.2 Linux Infra-red Remote Control support hth, oh and this is not AMD64 A
signature.asc
Description: Digital signature
