Hi all,
Marty wrote:
Greg Vickers wrote:
Hi Marty,
<snip>
Sorry. I'm not familiar with udev or lirc, nor how they interact in
deciding device names. It's surprising to me because I'm using the
upstream lirc, 0.8.2, and I get /dev/lirc0, as Debian's udev expects.
I'll try my mitigation strategy of removing the Hauppauge and
installing my Compro DVB card.
OK, I found out that Debian Etch uses a new input layer, and that the IR
inputs are in /dev/input/eventX where X corresponds the event number of
your input devices in 'cat /proc/bus/input/devices'
So my IR device is /dev/input/event1, instead of /dev/lirc or /dev/lirc0.
Wooties!
Greg
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
