On Wed, 2007-03-28 at 14:39 -0700, Andrew Sackville-West wrote:
> On Wed, Mar 28, 2007 at 09:30:56PM +0100, michael wrote:
> > On Wed, 2007-03-28 at 13:05 -0700, Andrew Sackville-West wrote:
> > > On Wed, Mar 28, 2007 at 12:48:19PM +0100, michael wrote:
> > > > On Wed, 2007-03-28 at 05:37 -0600, Teilhard Knight wrote:
> > > > > Folks
> > > > > I've a Creative Sound Blaster Live! 24bit soundcard which I've got to
> > > > > work in another Debian 2.6 box but am having problems with another
> > > > > box,
> > > > > so all help welcome. Full details are below, but essentially lspci
> > > > > sees
> > > > > the card but alsaconf gives firstly:
> > > > > "No supported PnP or PCI card found. │
> > >
> > > please provide us with relevant output of lspci -vv
> > >
> > > also, provide the output of
> > >
> > > lsmod | grep snd
> > >
> >
> > As requested:
> >
> > [EMAIL PROTECTED]:~$ sudo lspci -vv;lsmod |grep snd
> > Password:
> > {snip}
> >
> > 0000:04:05.0 Multimedia audio controller: Creative Labs SB Audigy LS
> > Subsystem: Creative Labs: Unknown device 1006
>
> ----------------------------------^^^^^^^^^^^^^^^^^
>
> it appears the kernel is not recognising your card. do you know which
> module it requires? you could manually insert the module (modprobe)
> and then try alsaconf again. If that worked, you'd have to then find
> out WHY the kernel wasn't identifying the card properly, or why
> themodule wasn'tbeing inserted (blacklisted perhaps? or maybe not
> selected in the kernel config).
>
> hth
with the other machines I used, alsaconf inserted the module. also note
that virtually all my devices are unknown (so nothing should work?!):
[EMAIL PROTECTED]:~/papers/citations$ lspci -vv
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev
0c)
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
0000:00:00.1 ff00: Intel Corp. Memory Controller Hub Error Reporting
Register (rev 0c)
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express
Port A0 (rev 0c) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
0000:00:03.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express
Port A1 (rev 0c) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev
02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host
Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 4: I/O ports at d880 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host
Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 177
Region 4: I/O ports at dc00 [size=32]
0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev
02)
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at dcfff800 (32-bit, non-prefetchable)
[size=16]
0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable
Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 185
Region 0: Memory at dcfffc00 (32-bit, non-prefetchable)
[size=1K]
Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dd000000-dfffffff
Prefetchable memory behind bridge: c0000000-dbffffff
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller
(rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 193
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 80000000 (32-bit, non-prefetchable)
[size=1K]
0000:00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller
(rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 193
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at d480 [size=4]
Region 2: I/O ports at d400 [size=8]
Region 3: I/O ports at d080 [size=4]
Region 4: I/O ports at d000 [size=16]
0000:00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 201
Region 4: I/O ports at 0400 [size=32]
0000:04:03.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit
Ethernet Controller (rev 05)
Subsystem: Intel Corp.: Unknown device 343f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at defa0000 (32-bit, non-prefetchable)
[size=128K]
Region 2: I/O ports at ec00 [size=64]
Capabilities: <available only to root>
0000:04:04.0 VGA compatible controller: nVidia Corporation NV34 [GeForce
FX 5200] (rev a1) (prog-if 00 [VGA])
Subsystem: Unknown device 1682:203d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 209
Region 0: Memory at dd000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at def80000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:04:05.0 Multimedia audio controller: Creative Labs SB Audigy LS
Subsystem: Creative Labs: Unknown device 1006
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at e480 [size=32]
Capabilities: <available only to root>
