kernel version: uname -a Linux debian 2.6.8-2-386 #1 Tue Aug 16 12:46:35 UTS 2005 i686 GNU/Linux
installed modules: lsmod This gives me a long list of modules. I do not see anything that looks to be related with ppp, network or tcp. How do I get outputs of these commands to be dumped to a txt file on a floppy disk? network status: ifconfig I have listed an Eth0, which does not work. For some reason the 2.6 kernel, after the initial install, sees my NIC as Eth1. I have not configured Eth1 yet because I want to focus on this problem. But Eth0 is listed with a very long hardware address, no IP information and no traffic. I have lo assigned to 127.0.0.1 mask 255.0.0.0 No traffic there ether. I have ppp0 listed with a valid IP address (I can ping it from the outside), Link encap:Point-to-Point Protocol Inet addr:70.218.54.229 P-t-P 66.174.26.4 Mask 255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICASE MTU:0 Metric:1 Rxpackets:34 errors:0 dropped:0 overruns:0 frame:0 Txpackets:52 errors:0 dropped:0 overruns:0 carrier:0 Collosions:0 txqueuelen:3 RX bytes:3687 (3.6 KiB) TX bytes:3845 (3.7 KiB) netfilter config: iptables -L ip_tables: 2000-2002 Netfilter Core Team Chain INPUT (policy ACCEPT) Target prot opt source destination Chain FORWARD (policy ACCEPT) Target prot opt source destination Chain OUTPUT (policy ACCEPT) Target prot opt source destination Ok this last command looks like a network filter output. Should there not be more information there? Tyson Varosyan Technical Manager, Uptime Technical Solutions LLC. [EMAIL PROTECTED] www.up-times.com 206-715-TECH (8324) UpTime/OnTime/AnyTime -----Original Message----- From: Marty [mailto:[EMAIL PROTECTED] Sent: Friday, January 06, 2006 12:43 PM To: debian-user@lists.debian.org Cc: debian-user@lists.debian.org Subject: Re: TCP not working over ppp connection (WAS: 5th day using Linux...) Tyson Varosyan wrote: > Hi Marty, > > I an very new to Linux. What do I type in to give you more information. I > used the 180MB install disk image from debian.org and I type in "linux26" at > the install prompt... Here are some tools that may yield useful output: kernel version: uname -a pci devices: lspci installed modules: lsmod network status: ifconfig netfilter config: iptables -L The output of tcpdump and any relevant contents of the system log files, e.g. /var/log/messages If you're not sure about the relevance of any particular output date, include it anyway. More is better. I usually include such output in the text of my messages. Other posters include output files as attachments or put them on their web site. (The last method is probably not the best in terms of archival value.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
