Hi,
I bought an old Compaq Prolinea Net1/25s to use as a cheap
mailserver, and I'm having trouble at the very early debian install
phase. I'm planning to install via floppy and then ftp. I boot with the
rescue disk, with no obvious problem. At the "Insert root floppy" prompt,
I put in the root floppy. Next I get
RAMDISK: Compressed image found at block 0
_
At this point it stops. After a few seconds, the floppy drive stops
reading.
I know the rescue and root disks I have work, because they work on my
laptop. I've also tried booting with the "root=/dev/fd0" option, with the
same results. I know the hard drive, and the computer, in general, is
alright, because it runs Windows 3.x and DOS with no problem. Any good
ideas?
I'm going to include all my system stats below. feel free to ignore them.
-patrick
(from a website)
OVERVIEW
CPU type/speed/cache/ROM level: 80486sx / 25 / 0
/ 8/25/93
HARDWARE
Total memory: 4 Mb
Conventional: 640 Kb
Reserved: 384 Kb
Extended: 3072 Kb
EMS memory board make/model: None
EMS memory board IO address: None
EMS memory board frame address: None
Keyboard type/language: Native / US
Video type: VGA
Network card make/model: DEC EtherWORKS
(LC, DE205)
Network card IRQ: 5
Network card IO address: 300
Network card memory address: D000
Mouse make/model: Compaq / M-S28-
6MD
Mouse port or COM port or IRQ: Mouse Port
(from opening up the computer)
the floppy drive is a Mitsubishi MF355F-498UC
hard drive listed in boot info below
(possibly relevant items from boot)
hda: QUANTUM TRB420A, ATA DISK drive
ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
hda: QUANTUM TRB420A, 402MB w/96kB Cache, CHS=1010/16/51
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
.
.
.
Partition check:
hda: hda1 hda3
