hi ya anthony
get a better 80-conductor IDE cable... not the old
cheap 40pin ( 33Mb/sec ) cable...
have fun
alvin
and turn on dma mode if "mounting it turns it off"
hdparm -d 1 /dev/hdc
On Thu, 17 Jan 2002, Robert Epprecht wrote:
> Anthony DeRobertis <[EMAIL PROTECTED]> writes:
>
> > On Thursday, January 17, 2002, at 09:20 AM, Robert Epprecht wrote:
> >
> >> /dev/hdc:
> >> Timing buffered disk reads: hdc: dma_intr: status=0x51 {
> >> DriveReady SeekComplete Error }
> >> hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >> hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> >> [ ... last two lines repeated three times ... ]
> >>
> >
> > You'd better not be trying UDMA100 on 40-pin cables.
>
> Hmm, didn't know I did...
>
> > What does hdparm -v /dev/hdc say?
>
> i2d:~# hdparm -v /dev/hdc
>
> /dev/hdc:
> multcount = 0 (off)
> I/O support = 0 (default 16-bit)
> unmaskirq = 0 (off)
> using_dma = 1 (on) changes to '0 (off)' after mounting it
> keepsettings = 0 (off)
> nowerr = 0 (off)
> readonly = 0 (off)
> readahead = 8 (on)
> geometry = 4982/255/63, sectors = 80043264, start = 0
>
> Robert
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
