I have a new hd. 'dmesg' says:
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hdc: Maxtor 4D040H2, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: Maxtor 4D040H2, 39083MB w/2048kB Cache, CHS=4982/255/63, UDMA
If I say 'hdparm -t /dev/hdc' (or want to mount it) I get:
/dev/hdc:
Timing buffered disk reads: hdc: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ ... last two lines repeated three times ... ]
hdc: DMA disabled
ide1: reset: success
64 MB in 14.67 seconds = 4.36 MB/sec
Why? How do I fix that?
Thank you for your help, Robert Epprecht.
