Drive is scsi, adapter is adaptec aha02940. Never had problems before. I attached a log using script instead of just redirecting the output.
On Mon, 7 Jan 2002, martin f krafft wrote: > also sprach Russ Cook <[EMAIL PROTECTED]> [2002.01.07.0013 +0100]: > > log with -vv is attached > > mh... no extra info... > > is this an IDE or a SCSI drive? and if IDE, are you using ide-scsi.o? > > -- > martin; (greetings from the heart of the sun.) > \____ echo mailto: !#^."<*>"|tr "<*> mailto:"; [EMAIL PROTECTED] > > give me ambiguity or give me something else. >
Script started on Sun Jan 6 17:33:32 2002 p90:/home/russ# cdrecord -vv /scsi1/debian.raw dev=0,3,0 Cdrecord 1.10 (i586-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 2.1.39 Using libscg version 'schily-0.5' Using libscg transport code version 'schily-scsi-linux-sg.c-1.66' atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC Vendor_info : 'YAMAHA ' Identifikation : 'CRW4416S ' Revision : '1.0g' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1566432 = 1529 KB FIFO size : 4194304 = 4096 KB Track 01: data 562 MB track: 1 start: 0 pregap: 150 Total size: 645 MB (63:58.53) = 287890 sectors Lout start: 646 MB (64:00/40) = 287890 sectors 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 AA 01 14 00 40 00 28 Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11078 (97:34/22) ATIP start of lead out: 336075 (74:43/00) speed low: 0 speed high: 4 power mult factor: 3 5 recommended erase/write power: 3 A2 values: 5C C6 26 Disk type: Phase change Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Blocks total: 336075 Blocks current: 336075 Blocks remaining: 48185 Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 9 seconds.8 seconds.7 seconds.6 seconds.5 seconds.4 seconds.3 seconds.2 seconds.1 seconds.0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 562 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00 Sense Key: 0x6 Unit Attention, Segment 0 Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset occurred) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 43.033s timeout 40s write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 67.577s Fixating... cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 480s cmd finished after 0.002s timeout 480s Fixating time: 0.006s cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. p90:/home/russ# exit Script done on Sun Jan 6 17:35:20 2002
