I can't kill X and can't even ssh into my box from another box.
Using Debian 3.0 kernel-2.4.18-bf2.4
I have read that burners need to be the master device.
So the HP burner is master on IDE2. I don't know what the deal is.
Whenever I start xcdroast and/or mount the burner to look at a cd,
I freeze up HARD. I have installed cdrecord and xcdroast.
Here is all the relevant information I can think of:
andy# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'HP ' 'CD-Writer+ 8200 ' '1.0f' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Here is relevant info from dmesg:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks CSB5: IDE controller on PCI bus 00 dev 79
ServerWorks CSB5: chipset revision 146
ServerWorks CSB5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD200BB-18DEA0, ATA DISK drive
hdb: MAXTOR 6L080L4, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 8200, ATAPI CD/DVD-ROM drive
hdd: GCR-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=2431/255/63, UDMA(100)
hdb: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63, UDMA(100)
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
<snip>
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HP Model: CD-Writer+ 8200 Rev: 1.0f
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 8x/24x writer cd/rw xa/form2 cdda tray
andy# ls -al /dev/cd*
lrwxrwxrwx 1 root root 3 Mar 6 13:07 /dev/cdrom -> hdd
lrwxrwxrwx 1 root root 4 Mar 6 11:29 /dev/cdrw -> scd0
brw-rw---- 1 root cdrom 24, 0 Mar 14 2002 /dev/cdu535
andy# cat /etc/modules
ide-scsi
eepro100
radeon
usb-ohci
input
usbkbd
keybdev
emu10k1
This was added to lilo.conf:
append="hdc=ide-scsi"
andy# cat /etc/default/cdrecord
CDR_DEVICE=hp
CDR_SPEED=4
CDR_FIFOSIZE=4m
teac= 1,3,0 -1 -1 ""
panasonic= 1,4,0 -1 -1 ""
plextor= 1,4,0 12 -1 ""
sanyo= 1,4,0 12 -1 burnproof
yamaha= 1,5,0 -1 -1 ""
cdrom= 0,6,0 2 1m ""
This is in /etc/fstab:
/dev/cdrom /cdrom iso9660 ro,user,noauto 0 0
/dev/cdrw /cdrw iso9660 ro,user,noauto 0 0
That is all I can think of for details. There is no info in messages
or syslog on my lockups.
Am I missing a module??
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
