Re: (Newbie) Compatibility while I am fumbling.

[Brian Durant]

Wow, thanks for the very clear, concise and informative answer. Let me 
ask while I am at it, if you think that I would still get this Debian 
support in a a stock 2.4 kernel in 3 rev. 1 or is there something 
specific with the hardware that you needed to use the 2.4.18-k7 kernel?

Cheers,

Brian

Shyamal Prasad wrote:

   "Brian" == Brian Durant <[EMAIL PROTECTED]> writes:

   Brian> While I am fumbling with problems getting Debian to install
   Brian> on my daughter's computer, I have been speculating about
   Brian> Debian support for the hardware on my box (considering a
   Brian> Win2k Pro and Debian 3 rev.1 dual boot). I have been
   Brian> looking for info on my SOYO SY-K7V DRAGON Plus!
   Brian> motherboard, AsanteFast Ethernet and built-in motherboard
   Brian> ethernet card (shows in Win2k Pro to be a VIA Rhine II Fast
   Brian> Ethernet),............
I use the same mother board you do. All the hardware on the board I've
tried to use works (which means I have no idea about the smart card
reader). The built in ethernet is supported with the via-rhine module,
the sound is supported via cmpci. The serial and parallel ports work
out of the box. 

I disabled acpi, and apm does the job of powering on/off correctly and
the BIOS will automatically restart after a powerfailure
correctly. lm_sensors took a little work, but the sensors now work
fine. I used a USB keyboard and mouse so that works too (hotplug with
the usb-uhci driver). 

I'm running 2.4.18-k7 and a stock Woody r1 system.

Best regards,
Shyamal
 





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]