I'm sure I'm missing something obvious here. I just installed an HP 9150i burner, and following the HOWTO plus some information I picked up off this list (thanks to Osamu Aoki & Casey Webster, plus several others), got it to work just fine.
I have the burner as /hdc and another cdrom as /hdd. Both now show as scsi devices (cdrecord -scanbus), but I cannot get anything to play on the /hdd drive. I'm using xcdroast, and set it up originally to write to /hdc and read from /hdd. It does both admirably. I have since set it to read and write from /hdc only. When I start Gnome CDplayer, it starts scanning and then goes nowhere. Attempts to play make it shut down. I cannot mount either /dev/hdd or /dev/scd1 (which I assume should be the scsi equivalent, since the scsi device number is 0,1,0). What am I doing wrong, please (or not doing)? TIA Cam -- Cam Ellison Ph.D. R.Psych. >From Roberts Creek on B.C.'s incomparable Sunshine Coast [EMAIL PROTECTED] [EMAIL PROTECTED]
