After using my dial-up connecton with speed reporting I wanted to force my modem up to it's maximum speed. It works from windows side, so, it's just up to configuring it also to Linux. Windows doesn't help, there is just one box where to check as "[] use always this speed", no AT commands found there (was that really a suprise?).
By the way it's internal ISA modem named SupraExpress 56i SP Intl So, I went to look modem's AT manual and edited /etc/chatscripts/ I added AT+MS= part just before number dialing. I don't know do I use wrong AT command, or are parameters wrong, anyway it calls, but not connect. By commenting that out, everything works like earlier - giving usually 48000 or 46667 connects. Any ideas where to look next? /etc/chatscript/<script> is here # This chatfile was generated by pppconfig 2.0.5. # Please do not delete any of the comments. Pppconfig needs them. # # ispauth pap # abortstring ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' REPORT CONNECT # modeminit '' ATZ # reports connection speed (jin) OK ATW2 # forcing modem speed to maximum (jin) OK AT+MS=,0,56000,56000,,, # ispnumber OK-AT-OK ATDT<my-isp> # ispconnect CONNECT \d\c # prelogin # ispname # isppassword # postlogin '' \d\c # end of pppconfig stuff /var/log/ppp.log looks like that Jan 16 13:50:00 jin pppd[360]: pppd 2.4.0 started by root, uid 0 Jan 16 13:50:01 jin chat[364]: abort on (BUSY) Jan 16 13:50:01 jin chat[364]: abort on (NO CARRIER) Jan 16 13:50:01 jin chat[364]: abort on (VOICE) Jan 16 13:50:01 jin chat[364]: abort on (NO DIALTONE) Jan 16 13:50:01 jin chat[364]: abort on (NO DIAL TONE) Jan 16 13:50:01 jin chat[364]: abort on (NO ANSWER) Jan 16 13:50:01 jin chat[364]: report (CONNECT) Jan 16 13:50:01 jin chat[364]: send (ATZ^M) Jan 16 13:50:01 jin chat[364]: expect (OK) Jan 16 13:50:01 jin chat[364]: ATZ^M^M Jan 16 13:50:01 jin chat[364]: OK Jan 16 13:50:01 jin chat[364]: -- got it Jan 16 13:50:01 jin chat[364]: send (ATW2^M) Jan 16 13:50:02 jin chat[364]: expect (OK) Jan 16 13:50:02 jin chat[364]: ^M Jan 16 13:50:02 jin chat[364]: ATW2^M^M Jan 16 13:50:02 jin chat[364]: OK Jan 16 13:50:02 jin chat[364]: -- got it Jan 16 13:50:02 jin chat[364]: send (AT+MS=,0,56000,56000,,,^M) Jan 16 13:50:02 jin chat[364]: expect (OK) Jan 16 13:50:02 jin chat[364]: ^M Jan 16 13:50:02 jin chat[364]: AT+MS=,0,56000,56000,,,^M^M Jan 16 13:50:02 jin chat[364]: OK Jan 16 13:50:02 jin chat[364]: -- got it Jan 16 13:50:02 jin chat[364]: send (ATDT<my-isp>^M) Jan 16 13:50:02 jin chat[364]: expect (CONNECT) Jan 16 13:50:02 jin chat[364]: ^M Jan 16 13:50:47 jin chat[364]: alarm Jan 16 13:50:47 jin chat[364]: Failed Jan 16 13:50:47 jin pppd[360]: Connect script failed Jan 16 13:50:48 jin pppd[360]: Exit. -- Jarkko Niemi Oh Dear! Said Pooh-bear, and deleted Windows [EMAIL PROTECTED] ----====( finger [EMAIL PROTECTED] or http://www.sci.fi/~jin )====----
