Jarkko Niemi wrote: > After using my dial-up connecton with speed reporting I wanted to force > my modem up to it's maximum speed. It works from windows side, so, it's > just up to configuring it also to Linux. Windows doesn't help, there is > just one box where to check as "[] use always this speed", no AT > commands found there (was that really a suprise?). > > By the way it's internal ISA modem named > SupraExpress 56i SP Intl > > So, I went to look modem's AT manual and edited /etc/chatscripts/ > I added AT+MS= part just before number dialing. > I don't know do I use wrong AT command, or are parameters wrong, > anyway it calls, but not connect. > By commenting that out, everything works like earlier - giving usually > 48000 or 46667 connects. > > Any ideas where to look next? >
<cut> I have the same modem, and was told the the following would give me 56K mode ATZ AT&F0 L3 W2 AT+MS=12,1,300,56000,0,0,33600 However, since my phone lines are so crummy I have no idea wether or not the settings work. My connections usually range from 14.4 to 28.8 no matter what modem or setting I try. (Gawd I'll be glad when I can get DSL). I'd like to know if the settings actually work above 33.6, so if you try them I'd appreciate knowing the result. :-) John -- Powered by the Penguin
