On Fri, 17 Dec 1999, Fethi Okyar wrote:
>
> I start XF86Setup
> choose the card in card settings
> choose the monitor, enter the correct hsync and vsync
> (i.e. ver_refres = 30-64, hor_refresh=47-104)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
In my experience here might be the typical problem. I'm running at
[EMAIL PROTECTED] and the limits are 31.5-96 for horisontal and 55-160 for
vertical. Anyway, you can manually insert the modeline. Here is mine:
Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync
+vsync
Sergey.
> and select 1280x1024 and 1024x768
>
> BUT...
>
> when I save and exit , in my XF86Config file there is only one modeline
> Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync
> -vsync
> nothing in regard to 1280x1024...
>
> So, the question is, how can I get XF86Setup to add a modeline for
> 1280x1024...
>
> >
> > --
> > ----------------------------------------------------------------------
> > Phil Brutsche [EMAIL PROTECTED]
> >
> > "There are two things that are infinite; Human stupidity and the
> > universe. And I'm not sure about the universe." - Albert Einstein
>
>
> --------------DD1369621D39CDF6CD4F8ED4--
>
>
> --------------EA5C5C9880DE2CFB18473039--
>
