--- Begin Message ---
--- Begin Message ---
Phil Brutsche wrote:
> A long time ago, in a galaxy far, far way, someone said...
>
> > Marcin Kurc wrote:
> >
> > > I used to have 1280x1024 on matrox m II.
> > > What version of XF are you running?
> >
> > I'm running version 3.3.2.2-4 of xserver-svga
>
> I'm using 3.3.5-1.99 btw
>
> >
> > Phil Brutsche said:
> > "First thing is check the refresh settings for the monitor"
> >
> > what can I do with this setting?? modify the modelines??
>
> These are the horizontal and veritcal refresh settings on the monitor -
> they need to correspond with what the card can do at the specified
> resolution.
>
> Modelines are another thing to check.
>
What I cannot get to work at this point is the following
I start XF86Setup
choose the card in card settings
choose the monitor, enter the correct hsync and vsync
(i.e. ver_refres = 30-64, hor_refresh=47-104)
and select 1280x1024 and 1024x768
BUT...
when I save and exit , in my XF86Config file there is only one modeline
Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync
-vsync
nothing in regard to 1280x1024...
So, the question is, how can I get XF86Setup to add a modeline for
1280x1024...
>
> --
> ----------------------------------------------------------------------
> Phil Brutsche [EMAIL PROTECTED]
>
> "There are two things that are infinite; Human stupidity and the
> universe. And I'm not sure about the universe." - Albert Einstein
--- End Message ---
--- End Message ---
