Karlheinz Nolte wrote: > > Hi all, > > some days ago I made the update from bo to hamm. Most things work fine, > but I have a problem with my ISA PNP ISDN card (Teles 16.3c). During > bootup the kernel doesn´t recognise the card and the initialisation > fails. Nevertheless, when I call "modprobe hisax" all needed modules > will be loaded and after calling "/etc/init.d/isdnutils start" I can > start the ISDN connection.
I have a Teles 16.3 ISDN card, but I don't think it's a plug and pray, and I need the following in my boot parameters (I use loadlin): hisax=3,2,10,0x180,HiSax and the kernel recognizes the card at boot. Check the parameters though as I think the format may have changed recently. This works for me though. The documentation under /usr/src/linux/Documentation/isdn is accurate, although it needs to be read read a couple of times. I use a 2.0.34 kernel, but this has been working since at least 2.0.32 [big snip ...] > Perhaps I should mention, that not the whole system is updated to hamm, > only the "required" (in dselect) packages was downloaded from the debian > ftp mirror. But since you can insmod it, and the connection comes up, it may just be the module parameters you're using. Shiraz -- Please remove '.noubce.see-sig' from my e-mail address to reply. Sorry for the inconvenience, but I really, really, really hate UBE, UCE, and anyone who sends it to me. If you don't know about UBE/UCE, see http://www.cauce.org -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
