Hi all, some days ago I made the update from bo to hamm. Most things work fine, but I have a problem with my ISA PNP ISDN card (Teles 16.3c). During bootup the kernel doesn´t recognise the card and the initialisation fails. Nevertheless, when I call "modprobe hisax" all needed modules will be loaded and after calling "/etc/init.d/isdnutils start" I can start the ISDN connection.
I have tried to create a new "/etc/isapnp.conf" with pnpdump (from package isapnptools (1.13-3.1). But the new config files doesn´t contain any entires from the ISDN card (only the Soundblaster Pro clone card). I don´t understand this behavior: I can use the card, but neither the kernel nor pnpdump doesn´t recognize it. Kernel is 2.0.33 with patch for the 16.3c Teles card. Should I try a 2.1.x kernel? Which? The following I found in /var/log/daemon.log: -------------------- Jul 8 21:16:19 localhost kerneld: started, pid=84, qid=0 Jul 8 21:16:21 localhost modprobe: can't locate module char-major-45 Jul 8 21:16:21 localhost modprobe: can't locate module char-major-45 Jul 8 21:16:22 localhost modprobe: can't locate module ippp0 Jul 8 21:16:23 localhost modprobe: can't locate module char-major-45 -------------------- This was during bootup. But now, after calling modprobe and isdnutils start by hand, I found this in /var/log/kern.log: -------------------- Jul 8 21:17:14 localhost kernel: CSLIP: code copyright 1989 Regents of the Univ ersity of California Jul 8 21:17:14 localhost kernel: ISDN subsystem Rev: 1.44/1.41.2.1/1.48.2.1/1.2 8/1.8 loaded Jul 8 21:17:14 localhost kernel: HiSax: Driver for Siemens chip set ISDN cards Jul 8 21:17:14 localhost kernel: HiSax: Version 2.8 Jul 8 21:17:14 localhost kernel: HiSax: Revisions 1.15.2.5/1.10.2.4/1.10.2.3/1. 30.2.4/1.8.2.4 Jul 8 21:17:14 localhost kernel: HiSax: Total 1 card defined Jul 8 21:17:14 localhost kernel: HiSax: Card 1 Protocol EDSS1 Id=teles (0) Jul 8 21:17:14 localhost kernel: HiSax: Teles 16.3c driver Rev. 1.1.2.2 Jul 8 21:17:14 localhost kernel: teles3c: defined at 0x580 IRQ 10 HZ 100 Jul 8 21:17:14 localhost kernel: teles3c: resetting card Jul 8 21:17:15 localhost kernel: Teles 16.3c: IRQ 10 count 0 Jul 8 21:17:15 localhost kernel: Teles 16.3c: IRQ 10 count 2 Jul 8 21:17:15 localhost kernel: HiSax: DSS1 Rev. 1.16.2.2 Jul 8 21:17:15 localhost kernel: HiSax: 2 channels added Jul 8 21:17:15 localhost kernel: HiSax: module installed Jul 8 21:17:31 localhost kernel: isdn: Verbose-Level is 1 Jul 8 21:17:32 localhost kernel: HiSax: debugging flags card 1 set to 4 Jul 8 21:18:58 localhost kernel: ippp0: dialing 0 0191011... Jul 8 21:18:59 localhost kernel: isdn_net: ippp0 connected -------------------- Why on earth the kernel doesn´t recognizes the card during bootup? Perhaps I should mention, that not the whole system is updated to hamm, only the "required" (in dselect) packages was downloaded from the debian ftp mirror. Can anybody give me some hints? -cu Karlheinz. -- | / mailto:[EMAIL PROTECTED] |__/ http://home.t-online.de/home/karlheinz.nolte | |\ | voice: +49-7141-978249 | | \| fax/data(modem): +49-7141-978250 (login: guest w/o pw) -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
