On Thu, Dec 12, 2002 at 03:25:01PM +0900, Nick Hastings wrote: > Hi Will, > > * will trillich <[EMAIL PROTECTED]> [021212 07:42]: > > QUESTION: how do i find out what selections apply to my hardware > > so that i can get the highest resolution possible? scan rate and > > refresh seem to be the kickers. > > Look in the documentation that came with your hardware. If you don't > have any documentation then google for your hardware specs.
My monitor has NOTHING on the outside of the case to indicate what model it is, so I would not be able to do this. All there is is the single word "PROJECT". Windoze 98 interrogates its plug & play data and identifies it as an ADI MS-5P+. I have since seen a non-rebranded ADI MS-5P+ and indeed it looks identical. It would be useful to pure Linux users - possibly including the OP - if there was some Linux tool that did this, so xf86config et al. could say "Your monitor appears to be an ADI MS-5P+, accept/change" or something like that, combined of course with a file listing many different monitors' capabilities. Pigeon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]