On Sat, Feb 21, 1998 at 03:25:42PM -0500, Tim Sailer wrote: > I wrote: > > I just tried to shuffle modems. Only /dev/ttyC1 shows connect speeds. > > That rules out modem settings. > > That makes me thing you need to look at /etc/mgetty.config. Check the > per-port init strings.
This is it: # # mgetty configuration file # # this is a sample configuration file, see mgetty.info for details # # comment lines start with a "#", empty lines are ignored # ----- global section ----- # # In this section, you put the global defaults, per-port stuff is below # set the global debug level (5 is quite verbose) debug 3 # set the local fax station id fax-id unconfigured # access the modem(s) with 38400 bps speed 115200 # the /dev/tty-device is owned by uucp.uucp and mode "rw-rw-r--" (664) port-owner root port-group dialout port-mode 0660 # incoming faxes are owned by "root.uucp" and mode "rw-rw----" (660) fax-owner root fax-group fax fax-mode 0660 # ----- port specific section ----- # # Here you can put things that are valid only for one line, not the others # # Zoom V.FX 28.8, connected to ttyS0: don't do fax, less logging # #port ttyS0 # debug 3 # data-only y # ZyXEL 2864, connected to ttyS1: maximum debugging, grab statistics # #port ttyS1 # debug 8 # init-chat "" \d\d\d+++\d\d\dAT&FS2=255 OK ATN3S0=0S13.2=1 OK # statistics-chat "" AT OK ATI2 OK # statistics-file /tmp/statistics.2864 # modem-type cls2 # direct connection of a VT100 terminal which doesn't like DTR drops # #port ttyS2 # direct y # speed 19200 # dtr-toggle n port ttyC1 data-only y init-chat "" ATZ OK port ttyC2 data-only y init-chat "" ATZ OK port ttyC4 data-only y init-chat "" ATZ OK # statistics-chat "" AT OK ATI6 OK ATI11 OK # statistics-file /tmp/statistics.ttyC2 -------------------------------- And this is from /etc/inittab: C1:23:respawn:/sbin/mgetty /dev/ttyC1 C2:23:respawn:/sbin/mgetty /dev/ttyC2 C4:23:respawn:/sbin/mgetty /dev/ttyC4 Thanks, Jeff -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
