David Wright wrote: > > On Thu, 19 Feb 1998, Jeff Noxon wrote: > > > On Wed, Feb 18, 1998 at 04:33:58AM +0000, [EMAIL PROTECTED] wrote: > > > > On Mon, Feb 16, 1998 at 01:06:59PM -0600, Jeff Noxon wrote: > > > >> I have three dial-in modems on my hamm box. They are all identical > > > >> USR Couriers AFIAK, and their configuration *appears* to be the same. > > > >> But one port always shows connect speed in wtmp, and the others do not: > > > > > > The modem settings are identical. The modem firmware revisions are > > identical. The mgetty configuration lines are the same. The inittab > > lines are the same. This is really bizarre. It used to work with bo, > > and one of my mgetty upgrades killed it a long time back. I asked back > > then, and nobody offered to help. > > So when you shuffle the modems around on the ports, does the same port > show the speed, or the same modem? At least that should eliminate the > possibility of differing modems.
We see this on our modems when the init is changed. There is a command to tell the modem to report the serial port speed or the connection speed. I can look it up tonight.. ACtually, I just looked at the USR manual online. You have to have ATX7 and make sure the dip switch 7 is set the same on all the modems. Tim -- (work) [EMAIL PROTECTED] / (home) [EMAIL PROTECTED] - http://www.buoy.com/~tps When in darkness or in doubt, run in circles, scream and shout. ** Disclaimer: My views/comments/beliefs, as strange as they are, are my own.** -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
