On Tue, 3 Feb 1998, Charles wrote:
> Hello,
> I am having a he// of a time trying to configure my supra 288i modem
> to work in linux. I have done everthing in the serial-HOWTO, used the
> information from supra on isapnptools, and have tried the information in
> the PPP-HOWTO, but nothing seems to be working yet. I keep going from
> one error to another. I am at a loss as to my latest error that shows
If your bios is Plug-and-Play or should I say Plug-and-Pray then you don't have
to do no nothing with the isapnptools, you can even screw things up if you do.
You just edit /etc/rc.boot/0setserial
78 # The typical user will only have 2 serial ports. To try and minimise
79 # problems, all other configurations have been commented out!
80 #
81 ${SETSERIAL} -b /dev/ttyS2 ${AUTO_IRQ} skip_test autoconfig ${STD_FLAGS}
82 #${SETSERIAL} /dev/ttyS3 ${AUTO_IRQ} autoconfig ${STD_FLAGS}
Here is a piece of mine, you just uncoment line 81 to get your modem configured,
per default only two serial ports are configured. And in the best case it
mistakes the IRQ.
I have that same modem and just by uncomenting that line it worked, no
isapnptools and nothing; Well then you need to configure pppd and all, but the
modem should have enogh taking off that little caracter out of line 81.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
