On Sun, Nov 24, 2002 at 07:46:18PM +0800, Crispin Wellington wrote: > On Sun, 2002-11-24 at 19:41, Sebastian Schinzel wrote: > > Hi, > > > > i just installed woody on a Compaq ML370 and it works perfekt except the > > tape drive. /proc/scsi/scsi shows only "Attached devices: none". > > "Compaq SMART2", "SYM53C8XX Version 2 SCSI support", "SCSI tape support" > > are compiled in the Kernel. > > Do i need some more SCSI-Drivers for the tape? I think it should at > > least appear in /proc, befor i can use it. > > The SMART2 drivers are RAID and RAID only. Your standard SCSI (with your > tape drive) is a sym53c8xx controller. modprobe and add that in. Then > your SCSI bus will appear.
Mmm, are you sure he needs sym53c8xx? His lspci seems to indicate otherwise: > Here is the lspci ouptut: > > ************************************************ > 00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) > 00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) > 00:01.0 RAID bus controller: LSI Logic / Symbios Logic (formerly NCR): Unknown >device 0010 (rev 02) > 00:02.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 08) > 00:03.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 >GT IIC] (rev 7a) > 00:04.0 System peripheral: Compaq Computer Corporation Advanced System Management >Controller > 00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 51) > 00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller > ************************************************ device 00:01.0 looks like a symbios RAID device, not the 53c8xx. I avoid Compaq like the plague so I can't add much intelligence to this discussion :) -- Nathan Norman - Incanus Networking mailto:[EMAIL PROTECTED] A good plan today is better than a perfect plan tomorrow. -- Gen. George S. Patton, Jr. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
